Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green printed circuit board with black memory chips and gold edge connectors, 240-pin DDR3 DIMM module

A-Tech

A-Tech 4GB DDR3 1333 PC3-10600 CL9 1.5V 240-pin desktop RAM

SKU CH-3FFN-D4XNR

A 4 GB DDR3 1333 module at 1.5 V with CL9 latency for desktop upgrades

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • Boost system responsiveness with 1333 MHz DDR3 speed
  • Expand multitasking headroom using 4 GB capacity
  • Reliable operation from major-brand chip components
  • Broad desktop compatibility across AMD and Intel platforms
  • Standard 1.5 V voltage for straightforward installation

4 GB DDR3 1333 Upgrade Module

This 4 GB DDR3 1333 module is a direct replacement for several Kingston desktop DIMMs and works with AMD and Intel platforms that accept unbuffered non-ECC memory. The single stick adds capacity without requiring paired installation.

DDR3 1333 interface limits

The DDR3 1333 standard tops out at 1333 MT/s with a 1.5 V supply, so the module cannot run faster than that ceiling on any motherboard. Systems locked to lower DDR3 speeds will down-clock the stick automatically.

CL9 latency at 1.5 V

CAS latency 9 at the standard 1.5 V is the key timing figure; if your board or existing memory requires a different latency or voltage this module will not be the correct match.

Helstu kostir

  • Boost system responsiveness with 1333 MHz DDR3 speed
  • Expand multitasking headroom using 4 GB capacity
  • Reliable operation from major-brand chip components
  • Broad desktop compatibility across AMD and Intel platforms
  • Standard 1.5 V voltage for straightforward installation

Tæknilýsing

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Spurningar um þessa vöru

Should I pick a single 4 GB stick or a matched pair for dual-channel?

This listing is a single 4 GB DDR3 1333 module; add a second identical stick to run dual-channel on a supporting motherboard.

What real-world speed does the 1333 MHz rating deliver inside my desktop?

The module runs at 1333 MT/s with CL9 latency at 1.5 V, giving standard DDR3-1333 bandwidth for everyday desktop workloads.

Does the 240-pin DDR3 DIMM fit any desktop board with DDR3 slots?

It uses the standard 240-pin unbuffered DDR3 DIMM form factor, so it fits any desktop DDR3 slot that accepts 1.5 V non-ECC modules.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.