Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 240-pin DDR3L UDIMM with black memory chips and gold contacts

A-Tech

A-Tech 4GB DDR3L 1600MHz ECC UDIMM 2Rx8 1.35V Server Memory

SKU CH-K6Z6-TFZ1A

4GB DDR3L 1600MHz ECC UDIMM 2Rx8 1.35V server memory module with Micron chipset for reliable performance

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in server workloads
  • DDR3L 1600 MHz speed matches PC3L-12800 system specs
  • Low 1.35 V voltage cuts power draw versus standard DDR3
  • 2Rx8 dual-rank layout maximises density per DIMM slot
  • 240-pin UDIMM form factor fits compatible server motherboards

Target system upgrade

This 4GB DDR3L module replaces the Micron MT18KSF51272AZ-1G6K1ZE in server and workstation platforms. It delivers ECC error correction and unbuffered operation for data integrity in always-on environments.

ECC unbuffered DDR3L at 1.35V

The stick runs at 1600MHz (PC3L-12800) with CL11 latency and a 2Rx8 organisation. Low-voltage DDR3L reduces power draw while maintaining compatibility with slots that accept 1.35V DDR3 memory.

240-pin DIMM for single-slot expansion

The module fits a standard 240-pin DDR3 DIMM socket and requires a platform that supports ECC unbuffered DDR3L at 1.35V. It adds capacity without registered buffering, leaving additional slots free for further upgrades.

Helstu kostir

  • ECC protection guards data integrity in server workloads
  • DDR3L 1600 MHz speed matches PC3L-12800 system specs
  • Low 1.35 V voltage cuts power draw versus standard DDR3
  • 2Rx8 dual-rank layout maximises density per DIMM slot
  • 240-pin UDIMM form factor fits compatible server motherboards

Tæknilýsing

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18KSF51272AZ-1G6K1ZE
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMT18KSF51272AZ-1G6K1ZE

Spurningar um þessa vöru

What does the 1600MHz speed mean when the module is installed in a server?

The module runs at DDR3L 1600 (PC3L 12800) with CL11 latency, delivering that bandwidth when the platform supports the 1600 MT/s data rate.

How does the DDR3L 1.35V interface affect compatibility with standard DDR3 slots?

It fits 240-pin DDR3 DIMM slots and operates at 1.35 V; the board must support DDR3L low-voltage operation for the module to run at its rated speed.

What physical clearance does the 240-pin UDIMM need inside a chassis?

Standard 240-pin UDIMM height; ensure the motherboard DIMM slots accept unbuffered ECC modules and that no heatsink or cable obstructs the full insertion depth.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.