Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 288-pin DDR4 server DIMM with black chips

A-Tech

A-Tech 4GB DDR4 2400MHz ECC RDIMM 1Rx8 for Samsung M393A5143DB0-CRC Server Memory

SKU CH-E8VB-YWR7E

4 GB DDR4 2400 MHz ECC registered DIMM with CL17 latency and 1.2 V operation for server upgrades

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB DDR4 2400MHz boosts server responsiveness
  • ECC RDIMM with 1Rx8 rank protects data integrity
  • CL17 latency at 1.20V balances speed and efficiency
  • 288-pin registered DIMM fits Samsung M393A5143DB0-CRC slot
  • Major-brand chips tested for dependable server uptime

4GB DDR4 2400MHz ECC RDIMM Server Memory

This 4GB DDR4 2400MHz ECC RDIMM module is built for server and workstation systems that require registered memory with error correction. It operates at 1.20V with a CAS latency of 17 and uses a 1Rx8 rank configuration on a 288-pin DIMM form factor. The module serves as a compatible replacement for the Samsung M393A5143DB0-CRC part number.

Installing the 288-pin DDR4 DIMM module

Installation follows the standard DIMM slot procedure: align the notch with the slot key, press down firmly until the retention clips engage, and ensure the module is fully seated. The most common issue is purchasing unbuffered UDIMM or load-reduced LRDIMM modules instead of the required registered RDIMM type, which prevents the system from posting or recognising the memory.

Verifying registered ECC support before ordering

Before ordering, confirm that your motherboard and processor support DDR4 registered ECC RDIMM memory at 2400MHz and can accept 1Rx8 modules. Systems designed only for unbuffered non-ECC UDIMM or load-reduced LRDIMM will not work with this registered module. Check your system documentation for the exact qualified memory list.

Helstu kostir

  • 4GB DDR4 2400MHz boosts server responsiveness
  • ECC RDIMM with 1Rx8 rank protects data integrity
  • CL17 latency at 1.20V balances speed and efficiency
  • 288-pin registered DIMM fits Samsung M393A5143DB0-CRC slot
  • Major-brand chips tested for dependable server uptime

Tæknilýsing

BrandA-Tech
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spurningar um þessa vöru

How can I verify the module is running at DDR4 2400MHz with CL17 after installation?

Check the memory speed and latency in your server BIOS or UEFI; it should report DDR4 2400 (PC4-19200) with CAS latency 17 at 1.20V.

What comes in the box and do I need any extra parts to install this RDIMM?

The box contains one 4GB DDR4 288-pin ECC RDIMM module; no additional components are required if your system has a free registered DIMM slot.

Which capacity or version should I choose if my server needs a 1Rx8 registered module?

This 4GB 1Rx8 DDR4 2400MHz ECC RDIMM matches the Samsung M393A5143DB0-CRC specification; select it when your system calls for a single-rank registered DIMM.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.