NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
A 4 GB DDR4 SODIMM running at 2666 MHz with CL19 latency and 1.2 V operation for laptop upgrades
This A-Tech module delivers 4GB of DDR4 memory at 2666MHz with CL19 latency and 1.20V operation. The 260-pin SO-DIMM form factor fits standard laptop, notebook and all-in-one sockets. It is an unbuffered, non-ECC replacement matched to the Micron MTA8ATF51264HZ-2G6B1 part number.
Buyers adding a single 4GB stick to an empty slot or replacing a failed module will find this a direct fit. Systems that require ECC registered memory or need higher densities per slot should look elsewhere, as this module is non-ECC unbuffered and limited to 4GB.
The CAS latency of 19 cycles at 2666MHz determines how quickly the memory responds to read requests. Matching this timing to your platform's supported speed is the key factor in deciding if this module will run at its rated performance.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MTA8ATF51264HZ-2G6B1 |
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | MTA8ATF51264HZ-2G6B1 |
| Recommend Use | Compatible Replacement for Micron MTA8ATF51264HZ-2G6B1 |
The module runs at 2666 MT/s with CL19 timing, so the DDR4 2666 interface sets the maximum data rate the memory controller can use.
This is a 260-pin DDR4 SO-DIMM; it fits standard laptop DDR4 slots that accept 260-pin modules.
Power off, unplug, open the panel, align the notch on the 260-pin edge connector, press firmly until the side clips click — the step often missed is pressing hard enough to seat both clips.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?