Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR3 240-pin ECC RDIMM modules in static bags

A-Tech

A-Tech 64GB (4x16GB) DDR3 1066 ECC RDIMM 4Rx4 1.5V 240-Pin Server RAM

SKU CH-AX0W-FPWAQ

A 64 GB quad-channel kit of four 16 GB DDR3 1066 MHz ECC registered DIMMs for servers and workstations

  • Capacity64GB (4 x 16GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 64GB (4 x 16GB)

Speed DDR3 1066 (PC3 8500)

  • 64 GB total capacity for demanding server workloads
  • Four 16 GB DDR3 modules in a quad-channel kit
  • ECC registered design detects and corrects data errors
  • 1066 MHz DDR3 speed with CL7 latency
  • 5 V standard voltage and 240-pin DIMM form factor

64GB DDR3 ECC RDIMM Kit

This 64GB kit contains four 16GB DDR3 1066 registered DIMMs built for servers and workstations that require ECC memory. Each module runs at 1.5V with a 4Rx4 quad-rank organisation and a 240-pin interface. The registered buffer helps the memory controller manage heavy loads in multi-socket systems.

Suits DDR3 RDIMM platforms only

These modules work exclusively in servers and workstations that support DDR3 registered ECC memory with 4Rx4 ranking. They will not fit desktop or laptop computers that use unbuffered non-ECC DIMMs. Buyers who need memory for a consumer PC should look elsewhere.

4Rx4 quad-rank organisation

The 4Rx4 configuration places four ranks of x4 chips on each DIMM, which increases density but also places a heavier load on the memory controller. Verify that your system's memory controller and BIOS support 4Rx4 registered modules before purchase.

Helstu kostir

  • 64 GB total capacity for demanding server workloads
  • Four 16 GB DDR3 modules in a quad-channel kit
  • ECC registered design detects and corrects data errors
  • 1066 MHz DDR3 speed with CL7 latency
  • 5 V standard voltage and 240-pin DIMM form factor

Tæknilýsing

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 16GB 4Rx4 PC3-8500R
Capacity64GB (4 x 16GB)
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the 4Rx4 DDR3 RDIMMs in the correct quad-channel slots?

Populate all four 240-pin slots following the motherboard manual's quad-channel sequence; the common mistake is mixing registered DIMMs with unbuffered modules or placing them in the wrong channel order.

When will the 1.5V ECC modules need replacement under normal server loads?

DDR3 RDIMMs have no scheduled replacement interval; they run until a correctable ECC error rate climbs or a module fails POST, which typically takes many years at 1066 MHz.

What thermal or signal limit appears first during sustained 1066 MHz operation?

The 1.5V JEDEC voltage ceiling is reached before thermal throttling; sustained full-load bandwidth is capped by the PC3-8500 data rate and quad-rank electrical loading.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.