Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Eight green DDR3 DIMMs with black chips in a row

A-Tech

A-Tech 64GB (8x8GB) DDR3 1600 ECC RDIMM 2Rx4 1.5V Server RAM

SKU CH-BVFQ-AJBZZ

Eight 8 GB DDR3 registered ECC modules totalling 64 GB at 1600 MHz CL11 for servers and workstations

  • Capacity64GB (8 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 64GB (8 x 8GB)

Speed DDR3 1600 (PC3 12800)

  • 64 GB kit expands server capacity for heavier workloads
  • ECC RDIMM detects and corrects memory errors automatically
  • Registered DDR3 1600 MHz modules deliver 12800 MT/s throughput
  • Dual-rank 2Rx4 organisation increases density per DIMM slot
  • 5 V standard voltage matches DDR3 server specifications

Kit capacity and target platform

This 64GB kit contains eight 8GB DDR3 registered DIMMs built for servers and workstations that require ECC memory. It is not compatible with standard desktop or laptop computers. The modules use a 240-pin form factor and operate at the standard 1.5V DDR3 voltage.

Sustained-load behaviour

Registered buffering and ECC error correction keep data integrity intact during continuous, multi-threaded workloads. Dual-rank x4 organisation allows the memory controller to interleave accesses across ranks, maintaining steady throughput under heavy virtualisation or database tasks. CL11 latency at 1600 MHz delivers predictable response times without voltage scaling.

Compatibility checks before ordering

Verify that your system supports DDR3 registered ECC RDIMMs and accepts 2Rx4 modules in the planned slot population. Confirm the maximum supported capacity per channel and the required memory seating order from the motherboard manual. Ensure the platform does not require load-reduced or unbuffered DIMMs instead.

Helstu kostir

  • 64 GB kit expands server capacity for heavier workloads
  • ECC RDIMM detects and corrects memory errors automatically
  • Registered DDR3 1600 MHz modules deliver 12800 MT/s throughput
  • Dual-rank 2Rx4 organisation increases density per DIMM slot
  • 5 V standard voltage matches DDR3 server specifications

Tæknilýsing

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3-12800R
Capacity64GB (8 x 8GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much power does the 1.5V DDR3 1600 kit draw when the server runs continuously?

Each module operates at the standard 1.50V DDR3 voltage. Total system power depends on the platform's memory controller and how many of the eight slots are populated.

What must the system already provide for these 240-pin registered ECC modules to function?

A DDR3 server or workstation motherboard that supports registered ECC RDIMMs, 240-pin DIMM slots, and the PC3-12800 speed grade. Desktop or laptop boards will not work.

Can the 2Rx4 dual-rank modules share channels with existing single-rank DDR3 1600 RDIMMs?

Mixing ranks on the same channel is platform-dependent. Consult the system manual for supported rank-per-channel configurations and population rules before adding this kit.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.