Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

A-Tech

A-Tech 64GB (8x8GB) DDR3L 1066 ECC RDIMM 4Rx8 1.35V Server RAM

SKU CH-QK57-S0D15

Eight 8 GB registered ECC DDR3L DIMMs running at 1066 MHz with 1.35 V operation for compatible servers and workstations

  • Capacity64GB (8 x 8GB)
  • SpeedDDR3L 1066 (PC3L 8500)
  • CAS LatencyCL7
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 64GB (8 x 8GB)

Speed DDR3L 1066 (PC3L 8500)

  • 64 GB kit of eight 8 GB modules expands server memory capacity
  • DDR3L 1066 MHz speed with CL7 latency accelerates data throughput
  • ECC registered design detects and corrects errors for data integrity
  • 35 V low-voltage operation reduces power draw versus standard DDR3
  • 240-pin DIMM form factor fits compatible DDR3 server and workstation slots

64 GB DDR3L ECC RDIMM kit

This kit contains eight 8 GB registered DIMMs for a total of 64 GB. Modules run at 1066 MHz with CL7 latency at 1.35 V. ECC and quad-rank organisation suit server and workstation platforms that require registered DDR3L memory. The 240-pin form factor fits compatible DDR3 slots only.

Suits DDR3L registered servers and workstations

Designed for systems that specifically support DDR3L ECC RDIMM modules. Not compatible with desktop or laptop computers that use unbuffered memory. Buyers who need unbuffered DIMMs or a different DDR generation should look at other memory types.

Fits 240-pin DDR3L registered channels

Installs in server or workstation boards with 240-pin DDR3L RDIMM slots. Quad-rank layout increases density per channel. Low-voltage operation at 1.35 V reduces power draw compared to standard 1.5 V DDR3. Verify your system manual for channel population rules and maximum supported capacity.

Helstu kostir

  • 64 GB kit of eight 8 GB modules expands server memory capacity
  • DDR3L 1066 MHz speed with CL7 latency accelerates data throughput
  • ECC registered design detects and corrects errors for data integrity
  • 35 V low-voltage operation reduces power draw versus standard DDR3
  • 240-pin DIMM form factor fits compatible DDR3 server and workstation slots

Tæknilýsing

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 4Rx8 PC3L-8500R
Capacity64GB (8 x 8GB)
SpeedDDR3L 1066 (PC3L 8500)
CAS LatencyCL7
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What server or workstation must I already own for this 240-pin DDR3L RDIMM kit to work?

You need a system that accepts DDR3 registered ECC memory in a 240-pin DIMM slot and supports quad-rank 4Rx8 modules at 1.35 V or 1.5 V.

How will these 1066 MHz quad-rank modules behave alongside slower DDR3 DIMMs I keep installed?

The memory controller will run all populated channels at the lowest common speed and apply the loosest timings across every installed module.

How can I confirm the kit is running as ECC registered memory at 1066 MHz after installation?

Check the BIOS memory information screen or run a tool such as dmidecode to verify ECC active, registered type, 1066 MT/s and 1.35 V operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.