Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Single green 288-pin DDR4 RDIMM module, black chips, gold contacts

A-Tech

A-Tech 64GB DDR4 2933 ECC RDIMM 2Rx4 server RAM

SKU CH-39BJ-70BPE

64 GB DDR4 2933 ECC registered DIMM with CL21 latency and 1.2 V operation

  • Capacity64GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • High-capacity 64GB module handles demanding server workloads
  • ECC RDIMM design detects and corrects data errors
  • DDR4 2933MHz speed moves data at PC4-23400 rates
  • Registered 2Rx4 architecture reduces electrical load on memory bus
  • 2V standard voltage lowers power draw per module

64GB DDR4 2933 ECC RDIMM for servers

This 64GB A-Tech module runs at DDR4 2933 (PC4-23400) with CL21 latency and 1.20V operation. It is a registered ECC DIMM built with 2Rx4 organisation on a 288-pin form factor. The stick uses major-brand chips and is validated as a direct replacement for HP part numbers P03053-091, P03053-0A1, P03053-CA1, P06192-001, P14492-B21 and P28217-B21.

Suited for registered ECC platforms only

This module fits servers and workstations that require registered ECC DDR4 memory at the 2933 speed grade. It will not work in consumer desktop boards that accept only unbuffered non-ECC DIMMs. Buyers needing unbuffered memory or a different speed bin should look at other modules.

288-pin DDR4 DIMM form factor

The single physical specification that decides compatibility is the 288-pin DDR4 DIMM form factor combined with registered ECC signalling. Verify that your system’s memory slots and BIOS support registered ECC DDR4 before ordering.

Helstu kostir

  • High-capacity 64GB module handles demanding server workloads
  • ECC RDIMM design detects and corrects data errors
  • DDR4 2933MHz speed moves data at PC4-23400 rates
  • Registered 2Rx4 architecture reduces electrical load on memory bus
  • 2V standard voltage lowers power draw per module

Tæknilýsing

BrandA-Tech
Capacity64GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spurningar um þessa vöru

Does this 64GB module use the standard 288-pin DDR4 DIMM form factor?

Yes, it is a 288-pin DDR4 DIMM that fits any server or workstation slot built for registered DDR4 memory.

What is the correct way to seat this registered ECC module so the system recognises the full 64GB?

Align the notch with the slot key, press down evenly until both side clips click, and populate slots in the order your motherboard manual specifies for registered DIMMs.

When should I expect to replace this 2933MHz ECC RDIMM in a typical server workload?

ECC RDIMMs have no moving parts; they are replaced only if a memory test reports uncorrectable errors or a capacity upgrade is required.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.