Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green PCB memory stick with black chips and gold edge connectors

A-Tech

A-Tech 8GB DDR3-1333 ECC UDIMM 2Rx8 server RAM

SKU CH-VB8X-XGJR2

8GB DDR3-1333 ECC UDIMM server memory with CL9 latency for IBM-Lenovo systems

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity adds headroom for virtualisation workloads
  • DDR3-1333 PC3-10600 speed matches server bus requirements
  • ECC UDIMM detects and corrects single-bit errors
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 50V standard voltage ensures compatibility with DDR3 platforms

Server DDR3 ECC UDIMM 8GB

This A-Tech module is an 8GB DDR3-1333 ECC UDIMM built for server and workstation systems. It operates at PC3-10600 speed with CL9 latency and standard 1.50V voltage. The unbuffered 2Rx8 design uses major brand chips and fits 240-pin DIMM slots.

Replaces IBM-Lenovo DDR3 modules

It serves as a direct replacement for IBM-Lenovo part numbers including 03T8429, 0A65718, 0A89461, 47J0171, 90Y3164, 90Y3165, and 90Y3167. The upgrade is worthwhile when a compatible system supports DDR3 ECC UDIMM memory and requires additional capacity for heavier workloads. Buyers needing registered DIMMs or a different DDR generation cannot use this module.

8GB capacity for moderate workloads

The single 8GB module handles typical server tasks such as virtualisation, database caching, and multi-user applications with room for multitasking. Headroom decreases when running many virtual machines or large in-memory datasets that exceed the installed capacity. Systems requiring more than 8GB per slot or higher memory bandwidth will need additional modules or a different platform.

Helstu kostir

  • 8GB capacity adds headroom for virtualisation workloads
  • DDR3-1333 PC3-10600 speed matches server bus requirements
  • ECC UDIMM detects and corrects single-bit errors
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 50V standard voltage ensures compatibility with DDR3 platforms

Tæknilýsing

BrandA-Tech
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spurningar um þessa vöru

Will the 240-pin DIMM fit in a standard DDR3 UDIMM slot on my server board?

Yes — the module is a 240-pin DDR3 UDIMM, so it installs in any DDR3 UDIMM slot keyed for 1.5 V operation.

What is the correct way to seat the module and what step do people skip?

Align the notch with the slot key, press straight down until both side clips snap shut, then verify the system reports the full 8 GB at 1333 MHz.

How long before the ECC chips or the 1.5 V power circuit might need replacement?

DDR3 ECC UDIMMs have no moving parts and are rated for continuous server duty; they typically last the life of the platform unless physical damage or voltage surges occur.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.