Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green printed circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 8GB DDR4 2400 ECC RDIMM 1Rx8 Server Memory for HP 805347 809080 819410 851353 853287 854592

SKU CH-MPP5-FJYRF

8GB DDR4 2400 ECC RDIMM server memory with registered design for HP systems

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory for heavier workloads
  • DDR4 2400MHz speed delivers fast data transfer rates
  • ECC registered design corrects errors for data integrity
  • 2V operation reduces power consumption and heat
  • Compatible with HP part numbers 805347 809080 819410 851353 853287 854592

Server DDR4 2400 ECC RDIMM

This 8 GB registered module runs at DDR4 2400 with CL17 latency and 1.20 V operation. It is built for HP ProLiant and compatible server platforms that require ECC error correction and registered signal buffering. The single-rank 1Rx8 organisation suits configurations that populate many DIMM slots per channel. Administrators expanding memory in supported systems will find a direct drop-in part.

Sustained load behaviour

ECC circuitry detects and corrects single-bit errors during continuous operation, preventing silent data corruption in long-running workloads. Registered signalling reduces electrical load on the memory controller, keeping timing margins stable when all 288-pin slots are populated. The module maintains its rated 2400 MT/s throughput under extended duty cycles typical of virtualization hosts and database servers.

Upgrade scope and limits

This part replaces any of the listed HP part numbers such as 805347-B21, 809080-591, 819410-001, 851353-B21, 853287-091 or 854592-B21. The jump is worthwhile when the platform supports DDR4 2400 registered ECC and the current configuration has free DIMM slots or lower-capacity modules. It does not suit systems that require unbuffered UDIMMs, higher speeds or capacities beyond 8 GB per slot.

Helstu kostir

  • 8GB capacity expands server memory for heavier workloads
  • DDR4 2400MHz speed delivers fast data transfer rates
  • ECC registered design corrects errors for data integrity
  • 2V operation reduces power consumption and heat
  • Compatible with HP part numbers 805347 809080 819410 851353 853287 854592

Tæknilýsing

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spurningar um þessa vöru

How much power does this 1.20V DDR4 2400 ECC RDIMM draw when running continuously in a server?

The module operates at the standard DDR4 voltage of 1.20V, which is the baseline for DDR4 power consumption; actual draw depends on the platform's memory controller and workload.

What must the system provide to use this 288-pin registered ECC DDR4 module?

A server or workstation motherboard with DDR4 RDIMM slots, registered ECC support in the chipset or CPU, and a memory controller qualified for DDR4 2400 operation.

Can this CL17 1Rx8 registered ECC DDR4 module be mixed with other DDR4 RDIMMs of different speeds or ranks in the same server?

Mixing is possible only if the platform supports mixed-rank and mixed-speed populations; the system will run all modules at the lowest common speed and may require specific slot placement per the vendor's memory population rules.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.