Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two black low-profile DDR5 DIMMs with aluminium heat spreaders

A-Tech

A-Tech Velocity 32GB (2x16GB) DDR5 5600MHz CL46 desktop RAM

SKU CH-CEZD-DCJXR

Dual-channel 32 GB DDR5 kit running at 5600 MHz CL46 with XMP 3.0 profiles and black aluminum heatspreaders

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 5600 (PC5 44800)
  • Tested Frequency5600
  • CAS LatencyCL46
  • Timing46-46-46-90

Capacity 32GB (2 x 16GB)

  • 16GB
  • 32GB (2 x 16GB)
  • 32 GB dual-channel kit for smoother multitasking
  • DDR5 5600 speed with CL46 46-46-46-90 timings
  • Intel XMP 3.0 profile enables one-click overclock
  • Low-profile black aluminum heatsink keeps modules cool
  • Compatible with DDR5 desktops using Intel 12th Gen or Ryzen 7000 CPUs

32 GB DDR5 kit for modern desktops

This A-Tech Velocity kit delivers 32 GB of DDR5 memory across two 16 GB modules. It targets desktop builders running Intel 12th Gen or newer CPUs and AMD Ryzen 7000 series or newer processors. The dual-channel layout matches typical consumer motherboards.

5600 MHz speed with CL46 timings

Rated at 5600 MHz (PC5-44800) with tested timings of 46-46-46-90, the modules operate at 1.1 V under JEDEC defaults and can scale to 1.35 V when the Intel XMP 3.0 profile is enabled. Headroom exists for the XMP boost, though latency remains fixed at CL46.

Black aluminium heatspreader on 288-pin UDIMMs

Low-profile black aluminium heatsinks cover each stick, aiding thermal performance without blocking large CPU coolers. The 288-pin unbuffered DIMM form factor fits standard DDR5 slots. Intel XMP 3.0 readiness simplifies one-click configuration in supporting BIOSes.

Helstu kostir

  • 32 GB dual-channel kit for smoother multitasking
  • DDR5 5600 speed with CL46 46-46-46-90 timings
  • Intel XMP 3.0 profile enables one-click overclock
  • Low-profile black aluminum heatsink keeps modules cool
  • Compatible with DDR5 desktops using Intel 12th Gen or Ryzen 7000 CPUs

Tæknilýsing

BrandA-Tech
SeriesVelocity
ModelAV2K16G5D56X
Part NumberAV2K16G5D56X
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR5 5600 (PC5 44800)
Tested Frequency5600
CAS LatencyCL46
Timing46-46-46-90
Tested Timing46-46-46-90
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack
Heat SpreaderYes
FeaturesIntel XMP 3.0 Ready / A-Tech Velocity Gaming Heatspreader / Major Brand DRAM IC Chips
Recommend UseHigh Performance or Gaming Memory / AMD Compatible / Intel Compatible
LED ColorNone

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will this DDR5 5600MHz kit work with my existing DDR5 memory running at a different speed?

Mixing DDR5 modules of different speeds forces the system to run at the lowest common frequency, so your existing memory would dictate the final speed.

How can I verify the XMP 3.0 profile is active after installing the 2x16GB modules?

Enter the BIOS and confirm the memory frequency reads 5600MHz with timings of 46-46-46-90 at 1.1V to 1.35V.

Does the 32GB kit include the black aluminum heatspreaders shown, or must they be purchased separately?

The kit includes two 16GB modules with the low-profile black aluminum heatspreaders already attached; nothing extra is required.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.