Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Flatbed SATA duplicator with four open slots, matte black finish

Acumen Disc

Acumen Disc AD04-OP600 1-to-4 SATA Duplicator 600MB/s

SKU CH-3189-M7HGA

Standalone duplicator copies up to four SATA drives at 600 MB/s and offers seven DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Target1 to 4
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 4

Data Transfer Rate 600MB/s

  • Duplicates four SATA drives simultaneously at 600MB/s
  • Clones partitions and boot sectors for exact copies
  • Erases to DoD 5220.22-M three-pass and seven-pass standards
  • Operates standalone with no host computer required
  • Accepts 2.5" and 3.5" SATA HDDs and SSDs without adapters

Purpose and audience

The Acumen Disc AD04-OP600 is a standalone SATA duplicator that copies one source drive to up to four targets at 600 MB/s. It handles both 3.5" and 2.5" SATA hard disks and solid-state drives without adapters and includes DoD-compliant sanitisation modes.

Who it suits and who it does not

IT teams and forensic labs that need fast, offline cloning and secure erasure of SATA media will benefit from the seven erase modes and 36 GB/min throughput. Buyers who need to process non-SATA media or who require a host-connected or network-attached solution should consider other equipment.

Deciding specification

The single figure that determines fit is the 600 MB/s per-slot transfer rate; if your workflow demands higher sustained bandwidth, this unit will not meet that requirement.

Helstu kostir

  • Duplicates four SATA drives simultaneously at 600MB/s
  • Clones partitions and boot sectors for exact copies
  • Erases to DoD 5220.22-M three-pass and seven-pass standards
  • Operates standalone with no host computer required
  • Accepts 2.5" and 3.5" SATA HDDs and SSDs without adapters

Tæknilýsing

BrandAcumen Disc
ModelAcumen Disc HDD Flatbed
Part NumberAD04-OP600
TypeHard Drive Duplicator
Target1 to 4
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate600MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Aðrar útgáfur af þessari vöru

4 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much heat or noise does the Acumen Disc AD04-OP600 produce when running all day?

The unit has no mandatory cooling-down period and is designed for continuous copying, indicating it manages heat without throttling during extended use.

What drives must I already own for the AD04-OP600 to work?

You need one source and up to four target drives with a SATA interface, either 2.5-inch or 3.5-inch HDDs or SSDs, as no adapter is required.

Will the duplicator work with older SATA I and II drives I still have?

Yes, it supports SATA I, II and III drives simultaneously, copying sector by sector regardless of the drive’s generation or format.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.