Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green PCIe RAID card, silver bracket, 6.57 by 2.52 inches

Adaptec

Adaptec 2304400-R SmartRAID 3101E-4I RAID controller

SKU CH-NXF8-FENKM MPN 2304400-R

A SAS RAID controller for laptops and PCs measuring 6.57 by 2.52 inches

  • FormatClassic
  • PoEClassic
  • Power,
  • Weight4 pounds
  • Temperature,
  • SAS interface connects drives directly
  • 3101E-4I model handles RAID arrays
  • 57 x 2.52 inch card fits standard slots
  • Adaptec 2304400-R part number ensures exact replacement
  • New condition delivers factory-fresh reliability

Adaptec SmartRAID 3101E-4I controller

This Adaptec SmartRAID 3101E-4I controller adds hardware RAID capability to a server or workstation using a SAS interface. It is built for IT administrators who need reliable array management for internal storage drives. The card uses a classic full-height bracket and fits a standard PCIe slot. It is supplied new from Microchip Storage Solutions.

Suits admins needing internal SAS RAID

This card suits administrators who want to configure RAID 0, 1, 5, 6 or 10 on SAS hard drives or SSDs inside a rack or tower chassis. It is not for systems that lack a full-height PCIe slot. It is not for builds that require external drive enclosures. It is not for users who need RAID on interfaces other than SAS.

SAS hardware interface

The single specification that decides fit is the SAS hardware interface. Your drives and backplane must use SAS connectors to work with this controller. Verify that the host system provides a compatible PCIe slot for the classic form factor before purchasing.

Helstu kostir

  • SAS interface connects drives directly
  • 3101E-4I model handles RAID arrays
  • 57 x 2.52 inch card fits standard slots
  • Adaptec 2304400-R part number ensures exact replacement
  • New condition delivers factory-fresh reliability

Tæknilýsing

BrandAdaptec
Model2304400-R
Part Number2304400-R
FormatClassic
PoEClassic
Power,
Weight4 pounds
Temperature,
Sendingarþyngd0.45 kg
Stærð sendingar200 × 200 × 110 mm

Spurningar um þessa vöru

Will the 6.57 x 2.52 inch board fit my low-profile server chassis?

The card measures 6.57 by 2.52 inches and uses a classic bracket, so verify your chassis supports full-height half-length PCIe slots before ordering.

Which slot and cable type are required to install the SmartRAID 3101E-4I?

Insert the controller into an x8 PCIe slot and connect internal SAS cables to the four onboard ports; the step often missed is seating the card fully so the bracket screw aligns.

Does the 2304400-R have a battery or flash module that will need replacement later?

The unit ships without a backup battery or flash module, so no scheduled replacement is required unless you add an optional ZMCP module separately.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.