Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular metal mining unit with four fans, matte grey finish

AFRNDK

AFRNDK Antminer S19J Pro 100TH/s 3050W SHA-256 ASIC mining hardware

SKU CH-QY1G-QG3JD

SHA-256 ASIC miner delivers 100 TH/s at 3050 W with 0.031 J/GH efficiency and 75 dB noise

  • TypeMining Machine/Miner
  • Crypto AlgorithmSHA 256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate100TH/S
  • Noise level80dB
  • Delivers 100 TH/s hashrate for Bitcoin mining
  • Runs on SHA-256 algorithm for secure hashing
  • Operates at 3050 W power consumption
  • Requires 220 V input voltage for safe operation
  • Produces 80 dB noise with four fans

AFRNDK Antminer S19J Pro 100TH/s SHA-256 ASIC

This ASIC miner is built for Bitcoin mining using the SHA-256 algorithm. It delivers a hash rate of 100 TH/s while drawing 3050 W of power. The unit operates on a 220 V supply and produces a noise level of 80 dB. It targets operators who need dedicated SHA-256 hardware for BTC mining.

Upgrade from S17 T19 S19 series to 100 TH/s

The S19J Pro replaces earlier models such as the S17, T19 and S19 with a higher hash rate and improved efficiency of 0.031 J/Gh. New firmware reduces start-up time and improves stability during continuous operation. The jump is worth it when electricity cost per kilowatt-hour makes the lower energy per gigahash decisive. Four fans manage thermal load at the rated 3050 W power draw.

220 V input constraint and 80 dB acoustic limit

The miner requires a 220 V input; incorrect voltage can damage the hardware. At 80 dB the noise level suits dedicated facilities rather than office or home environments. Efficiency of 0.031 J/Gh sets the practical floor for power cost calculations. No other interface or protocol limitations are specified for this SHA-256 ASIC device.

Helstu kostir

  • Delivers 100 TH/s hashrate for Bitcoin mining
  • Runs on SHA-256 algorithm for secure hashing
  • Operates at 3050 W power consumption
  • Requires 220 V input voltage for safe operation
  • Produces 80 dB noise with four fans

Tæknilýsing

BrandANTMINER
SeriesS19J PRO
ModelS19J PRO
TypeMining Machine/Miner
Crypto AlgorithmSHA 256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate100TH/S
Noise level80dB

Spurningar um þessa vöru

What input voltage does the AFRNDK Antminer S19J Pro require?

The miner requires 220 V input; connecting it to a different voltage can damage the unit.

What is the correct firmware update procedure for the S19J Pro and which step is most often missed?

Apply the new firmware design through the controller interface, then restart the miner; the step most often missed is the mandatory reboot after flashing.

When should the four cooling fans be inspected or replaced on this 3050 W ASIC miner?

Inspect all four fans every few months for dust build-up or bearing noise; replace any fan that spins unevenly or exceeds the 75 dB operating level.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.