Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular metal mining unit, matte grey finish, four fans on one side, Ethernet port visible, 195 by 290 by 400 millimetres

AFRNDK

AFRNDK Bitmain Antminer E9 Pro 3680MH/s 2200W EtHash mining hardware

SKU CH-389M-RBN8C

An EtHash miner delivering 3680 MH/s at 2200 W with four fans and Ethernet connectivity

  • Crypto AlgorithmEtHash
  • Hashrate3680MH/S
  • Network ConnectionEthernet
  • Noise level80dB
  • Power Consumption2200W
  • High EtHash throughput at 3680 MH/s for efficient mining
  • 2200 W power draw balances performance with electricity cost
  • Operates reliably from 5 °C to 45 °C ambient temperature
  • Four integrated fans keep components cool under continuous load
  • Ethernet interface provides stable wired connectivity for pool communication

Antminer E9 Pro EtHash Miner

The Bitmain Antminer E9 Pro delivers a 3680 MH/s hashrate on the EtHash algorithm for mining ETC, ETHW and ETCZIL. It draws 2200 W from a 176–264 V supply and includes an integrated power supply. Four fans produce up to 85 dB of noise during operation. The unit weighs 14.2 kg and measures 195 x 290 x 400 mm.

Upgrade From GPU EtHash Rigs

This ASIC replaces multi-GPU farms that mine the same algorithm at far lower efficiency. The jump is worth it when electricity cost per kilowatt-hour makes 3.68 GH/s at 2200 W more profitable than the combined GPU hashrate and power draw. Operators must ensure 220 V input; incorrect voltage can damage the hardware.

Rack Installation And Thermal Limits

The 195 x 290 x 400 mm chassis fits standard 19-inch racks with adequate depth clearance. Four fans maintain an operating range of 5–45 °C; exceeding the upper limit triggers throttling or shutdown. Ethernet provides the only network link, so a wired switch port must be available. Verify 176–264 V supply stability before first power-on.

Helstu kostir

  • High EtHash throughput at 3680 MH/s for efficient mining
  • 2200 W power draw balances performance with electricity cost
  • Operates reliably from 5 °C to 45 °C ambient temperature
  • Four integrated fans keep components cool under continuous load
  • Ethernet interface provides stable wired connectivity for pool communication

Tæknilýsing

BrandBitmain
ModelANTMINER E9 PRO
Crypto AlgorithmEtHash
Hashrate3680MH/S
Network ConnectionEthernet
Noise level80dB
Power Consumption2200W

Spurningar um þessa vöru

Will the 195 x 290 x 400 mm frame fit on a standard 19-inch rack shelf?

The unit measures 195 mm high, 290 mm wide and 400 mm deep, so it sits on a 19-inch shelf but exceeds the typical 1U height and needs at least 400 mm of shelf depth.

What is the correct sequence for connecting the 176-264 V supply to avoid damaging the miner?

Verify the outlet delivers 220 V nominal, plug the included PSU into the wall first, then attach the PSU cables to the miner, and only then power on the breaker.

How often should the four internal fans be cleaned when the unit runs at 85 dB in a 45 °C ambient?

Inspect and blow out dust from all four fans every four to six weeks; higher ambient temperatures or continuous load will shorten that interval.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.