Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black acetal ends with borosilicate glass tube and RGB LED ring, 250mm long

Alphacool

Alphacool Eisbecher Aurora 250mm Glass Reservoir D5 Body Black/acetal G1/4

SKU CH-M1EP-Y2NH1

A 250mm borosilicate glass reservoir with an integrated D5 pump top, 12 addressable RGB LEDs and Lighttower water effect, mountable on feet, 120 or 140mm fan locations or directly to a radiator

  • TypeReservoir

Size 250mm

  • Real glass tube replaces standard plastic for clearer coolant view
  • 12 addressable RGB LEDs in bottom ring create Lighttower water effect
  • Mount on case floor, 120 mm or 140 mm fan positions, or direct to radiator
  • Designed to accept D5 pump body (pump not included)
  • G1/4 threads throughout for standard water-cooling fittings

Reservoir with D5 pump mount

The Alphacool Eisbecher Aurora is a 250mm borosilicate glass reservoir designed to accept a D5 pump body. An embedded 5V digital RGB ring with 12 LEDs illuminates the coolant from below to create the Lighttower water effect. Mounting feet and frames for 120mm or 140mm fan locations are included for versatile installation.

Builders who want integrated lighting

This unit suits custom-loop builders who want a glass tube with addressable RGB lighting and flexible mounting on radiators or fan mounts. It is not for users who need a reservoir with an included pump or a unit that fits a DDC pump format. Buyers who require multiple inlet and outlet ports beyond the standard G1/4 threads should look elsewhere.

D5 pump body compatibility

The reservoir body is machined specifically for a D5 pump top, so the pump format is the single specification that determines fit. Verify that your pump uses the D5 form factor before purchase. The G1/4 thread ports accept standard fittings for hard or soft tubing.

Helstu kostir

  • Real glass tube replaces standard plastic for clearer coolant view
  • 12 addressable RGB LEDs in bottom ring create Lighttower water effect
  • Mount on case floor, 120 mm or 140 mm fan positions, or direct to radiator
  • Designed to accept D5 pump body (pump not included)
  • G1/4 threads throughout for standard water-cooling fittings

Tæknilýsing

TypeReservoir

Aðrar útgáfur af þessari vöru

1 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What does the 250 mm glass tube mean for coolant capacity and loop layout?

The 250 mm borosilicate glass tube gives a tall, narrow reservoir that holds a useful volume of coolant while keeping the footprint small, so it fits in tight cases and makes bleed-and-fill easier.

How does the 5 V digital RGB LED ring connect and what does it control?

The 12 addressable LEDs sit in a ring at the base of the glass tube and plug into a standard 5 V aRGB header, lighting the coolant column from bottom to top with the Lighttower water effect.

Which mounting options are included for the 120 mm and 140 mm fan locations?

The kit supplies feet for floor mounting plus frames that bolt to any 120 mm or 140 mm fan holes, letting you attach the reservoir directly to a radiator or fan bracket.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.