Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Alphacool NexXxoS XT45 full copper 280mm radiator with two 140mm fan slots

Alphacool

Alphacool NexXxoS XT45 Full Copper 280mm Radiator

SKU CH-AQKQ-QY3ZD

Full-copper 280 mm radiator with dual 140 mm fan slots and separated chambers for directed coolant flow

  • TypeRadiator
  • Radiator Size280 mm
  • Fan Size2 Fan Slots (140 mm)

Size 280mm

  • Full copper construction boosts heat transfer
  • Separated chambers guide coolant for efficient flow
  • 280 mm size fits two 140 mm fans
  • Includes 30 mm and 35 mm mounting screws
  • Five plugs supplied for flexible port sealing

280 mm Full-Copper Radiator

The Alphacool NexXxoS XT45 is a 280 mm water-cooling radiator built entirely from copper, including its chambers, fins and channels. It targets custom-loop builders who want maximum thermal conductivity from a single heat exchanger. The unit ships with five sealing plugs and two sets of M3 mounting screws.

Thermals Noise Power

Full-copper construction improves heat transfer compared with mixed-material designs, giving the coolant a directed path through separated chambers. Two 140 mm fan slots allow builders to choose airflow and static-pressure profiles that match their noise targets. No pump, fans or power-draw figures are supplied with the radiator itself.

Build Integration

The radiator occupies a 280 mm mounting space and accepts standard 140 mm fans using the included 30 mm or 35 mm M3 screws. It frees the builder from sourcing separate plugs and hardware for a clean installation. Loop designers must supply their own pump, reservoir, tubing and coolant to complete the system.

Helstu kostir

  • Full copper construction boosts heat transfer
  • Separated chambers guide coolant for efficient flow
  • 280 mm size fits two 140 mm fans
  • Includes 30 mm and 35 mm mounting screws
  • Five plugs supplied for flexible port sealing

Tæknilýsing

TypeRadiator
Radiator Size280 mm
Fan Size2 Fan Slots (140 mm)

Aðrar útgáfur af þessari vöru

3 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the 280 mm radiator and which screws should I use for 140 mm fans?

Mount the radiator using the eight M3×30 mm screws for direct fan attachment or the eight M3×35 mm screws when placing a 140 mm fan with a rubber gasket between fan and radiator; the longer set prevents the screw bottoming out before the fan is secure.

What maintenance will the full-copper radiator need over time?

Flush the loop once a year with distilled water and a mild biocide to stop oxidation inside the copper chambers and channels; inspect the five brass plugs for weeping and re-tighten them if any coolant residue appears.

What thermal limit appears first when the 45 mm thick core runs continuously at high load?

The 45 mm core’s fin density saturates airflow from the two 140 mm fans, so coolant temperature stops dropping once fan speed reaches the point where pressure drop equals the fans’ maximum static pressure.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.