Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
ATX motherboard with metallic thermal armor finish

ASUS

ASUS SABERTOOTH X99 Intel X99 DDR4 64GB ATX motherboard

SKU CH-2T4Q-8FJEK

Supports LGA 2011-v3 CPUs with Intel X99 chipset, DDR4 memory up to 64GB in an ATX form factor

  • CPU Socket TypeLGA 2011-v3
  • ChipsetIntel X99
  • Maximum Memory Supported64GB
  • LGA 2011-v3 socket accepts Intel X99 platform CPUs
  • Intel X99 chipset enables DDR4 memory architecture
  • Supports up to 64GB DDR4 for high-capacity workloads
  • ATX form factor fits standard chassis builds
  • Includes SATA cable and I/O back panel for immediate setup

ASUS SABERTOOTH X99 LGA 2011-V3 Intel X99

The ASUS SABERTOOTH X99 is an ATX motherboard built around the Intel X99 chipset with an LGA 2011-v3 socket. It supports DDR4 memory up to a maximum capacity of 64 GB. This new board is intended for enthusiasts building or repairing a high-end desktop platform based on this specific chipset. The package includes the motherboard, a metal battery, one SATA cable and an I/O back panel.

Suited for X99 platform builds and upgrades.

This board fits builders who need an LGA 2011-v3 foundation for an Intel X99 system and who can work with the included SATA cable and I/O shield only. It does not suit buyers who require a different CPU socket, a different chipset or a motherboard that ships with a full accessory kit including additional cables or documentation. The board arrives without original packaging.

LGA 2011-v3 socket and Intel X99 chipset define

The single specification that decides fit is the LGA 2011-v3 socket paired with the Intel X99 chipset. Only processors designed for this exact socket will install and function. The four DDR4 slots accept up to 64 GB total memory. Verify your CPU and memory kit match this socket and chipset before purchasing.

Helstu kostir

  • LGA 2011-v3 socket accepts Intel X99 platform CPUs
  • Intel X99 chipset enables DDR4 memory architecture
  • Supports up to 64GB DDR4 for high-capacity workloads
  • ATX form factor fits standard chassis builds
  • Includes SATA cable and I/O back panel for immediate setup

Tæknilýsing

BrandASUS
ModelASUS SABERTOOTH X99
CPU Socket TypeLGA 2011-v3
ChipsetIntel X99
Maximum Memory Supported64GB

Spurningar um þessa vöru

Which processor socket must my CPU have to fit this ASUS SABERTOOTH X99 board?

The board uses the LGA 2011-v3 socket, so the installed CPU must match that exact socket type.

Will my existing DDR4 memory modules work at the 64GB maximum capacity listed for this motherboard?

Yes, the board supports DDR4 up to 64GB total, so compatible DDR4 DIMMs you already own can be used within that limit.

How can I confirm the motherboard is operating correctly after I install it with the supplied SATA cable and I/O back panel?

Power on the system; a successful POST and BIOS screen indicate the board, SATA connection and rear I/O are functioning as intended.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.