Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Atermiter X99 B85 motherboard with Xeon E5-2670 V3 and two 16GB DDR4 REG ECC modules installed

Atermiter

Atermiter Atermiter-X99-B85 Embedded Solution Xeon E5-2670 V3 32GB DDR4

SKU CH-S3D2-W0AND MPN Atermiter-X99-B85

X99 motherboard kit with Xeon E5-2670 V3 and 32 GB DDR4 REG ECC memory

  • CPU TypeIntel Core 5th gen (LGA 2011-v3)

Option X99(B85)-2670 V3 -16G3200Mhz x 2pcs(32GB)

  • Ready-to-run kit with Xeon E5-2670 V3 and 32 GB DDR4 REG ECC
  • B85 chipset motherboard supports LGA 2011-3 Xeon V3 series CPUs
  • 32 GB total memory (2 × 16 GB) at 3200 MHz rated speed
  • CPU memory controller limits effective RAM speed to 2133 MHz
  • Board measures 280 × 220 mm with four DDR4 slots (orange primary, black secondary)

Ready-to-run Xeon workstation kit

This bundle pairs an LGA 2011-3 Xeon E5-2670 V3 processor with 32GB of registered ECC DDR4 on an X99 board that uses a B85 chipset. The memory ships as two 16GB modules rated at 3200MHz, although the fitted CPU caps the effective speed at 2133MHz. The board measures 280 by 220 millimetres and provides four DDR4 slots with colour-coded primary and secondary channels.

Suitable for server-style compute tasks

The combination targets workloads that benefit from ECC memory and multi-threaded Xeon performance such as virtualization hosts, rendering nodes or scientific calculation. Builders who need integrated graphics, consumer-grade memory compatibility or a mainstream desktop chipset should look elsewhere. The board lacks onboard video and the registered DIMMs cannot be mixed with standard unbuffered desktop RAM.

CPU-limited memory ceiling

Although the DIMMs are specified at 3200MHz, the installed Xeon E5-2670 V3 only supports DDR4 up to 2133MHz, so the system will run at that lower frequency regardless of module rating. This single constraint determines whether the kit matches the performance envelope your application requires.

Helstu kostir

  • Ready-to-run kit with Xeon E5-2670 V3 and 32 GB DDR4 REG ECC
  • B85 chipset motherboard supports LGA 2011-3 Xeon V3 series CPUs
  • 32 GB total memory (2 × 16 GB) at 3200 MHz rated speed
  • CPU memory controller limits effective RAM speed to 2133 MHz
  • Board measures 280 × 220 mm with four DDR4 slots (orange primary, black secondary)

Tæknilýsing

CPU TypeIntel Core 5th gen (LGA 2011-v3)

Aðrar útgáfur af þessari vöru

4 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the board need a separate graphics card to display video?

The motherboard has no integrated video, so a discrete graphics card is required for any display output.

Will the included E5-2670 V3 run at the memory's rated 3200 MHz?

The CPU memory controller tops out at 2133 MHz, so the 3200 MHz REG ECC modules will operate at 2133 MHz with this processor.

How can I confirm the REG ECC memory is recognised correctly after assembly?

Boot into the BIOS and verify that 32 GB of registered ECC DDR4 is shown at 2133 MHz with no errors reported.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.