BFKK
BFKK BPI-R4 Pro 8X/4E Development Board 8GB DDR4 8GB eMMC 2x 10G SFP&RJ45 4x 2.5G LAN
Development board with MediaTek Filogic 880 quad-core SoC, 8GB DDR4, 8GB eMMC, dual 10G SFP and RJ45 plus four 2.5G LAN ports
Size 4E
- 8X
- 4E
- MediaTek MT7988A quad-core ARM Cortex-A73 SoC powers high-throughput routing
- 8 GB DDR4 memory with 8 GB eMMC storage handles demanding gateway workloads
- Dual 10 GbE SFP and RJ45 ports deliver 36 Gbps aggregate wired bandwidth
- Four 2.5 GbE LAN ports plus 26-pin GPIO header expand connectivity for NAS and IoT
- OpenWRT support on Filogic 880 platform enables custom router and smart-home firmware
BPI-R4 Pro 8X/4E Development Board
This board is a high-performance IoT edge device and development platform built around the MediaTek MT7988A (Filogic 880) quad-core ARM Cortex-A73 processor running at 1.8 GHz. It targets developers and network engineers building custom OpenWRT router appliances, smart home gateways, or NAS solutions that require multi-gigabit wired connectivity and Wi-Fi 7 wireless capability.
Check Power and Expansion Requirements
Verify your power supply can deliver sufficient current for the MediaTek SoC, 8GB DDR4 memory, 8GB eMMC storage, and any attached M.2 NVME SSD or 5G cellular module via the M.2 2280 and USB 3.2 interfaces. Ensure your enclosure accommodates the 26-pin GPIO header (2x13 pin) for UART, I2C, SPI, PWM, and I2S expansion, and confirm antenna placement for the dual-band Wi-Fi 7 radio.
Bundled Storage and Network Offload
The onboard 8GB eMMC and 128MB SPI-NAND flash provide immediate boot media for OpenWRT without requiring an external MicroSD card. The MediaTek TOPS tunnel offload engine accelerates tunneling protocols across the 1x 10G SFP, 1x 10G RJ45 (combo), and 4x 2.5GbE LAN ports, reducing CPU load for gateway and VPN workloads.
Helstu kostir
- MediaTek MT7988A quad-core ARM Cortex-A73 SoC powers high-throughput routing
- 8 GB DDR4 memory with 8 GB eMMC storage handles demanding gateway workloads
- Dual 10 GbE SFP and RJ45 ports deliver 36 Gbps aggregate wired bandwidth
- Four 2.5 GbE LAN ports plus 26-pin GPIO header expand connectivity for NAS and IoT
- OpenWRT support on Filogic 880 platform enables custom router and smart-home firmware
Tæknilýsing
Engin birt tæknilýsing fyrir þessa vöru enn.
Aðrar útgáfur af þessari vöru
1 í viðbót í sama vöruflokki
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
Spurningar um þessa vöru
Does the board ship with a power supply, case or micro-SD card, or must they be bought separately?
The bundle contains only the BPI-R4 Pro board itself; a 12 V power adapter, enclosure and micro-SD card are not included and must be sourced separately.
The listing shows 4E and 8X variants — which one provides 8 GB of DDR4 memory?
The 8X version is the one fitted with 8 GB of DDR4 RAM; the 4E version has 4 GB instead.
The headline mentions 36 Gbps Wi-Fi 7 throughput — what does that figure represent in practice?
It is the theoretical aggregate wireless bandwidth the MT7988A SoC can deliver across both bands; real-world speeds will be lower and depend on client capability, channel width and interference.
Einnig í þessum vöruflokki
Fólk bar þetta saman
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.




