Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular metal chassis with front grille and rear exhaust vents, industrial finish

bitmain

Bitmain Antminer L7 9500 MH/s 3425W mining hardware

SKU CH-W9JN-2E1V7

Litecoin and Dogecoin ASIC miner delivering 9500 MH/s at 3425 W with integrated PSU

  • 9500 MH/s hash rate powers profitable Litecoin and Dogecoin mining
  • 3425 W power draw defines the energy cost per coin earned
  • 75 dB noise level requires dedicated ventilation or remote siting
  • 195 x 290 x 370 mm footprint fits standard 19-inch rack shelves
  • 15 kg weight allows single-person installation and rack mounting

Antminer L7 9500 MH/s Miner

The Bitmain Antminer L7 delivers a hash rate of 9500 MH/s for Scrypt-based coins such as Litecoin and Dogecoin. It draws 3425W of power and includes the required PSU. The unit measures 195 x 290 x 370mm and weighs 15Kg. Operating noise is rated at 75db.

Upgrade from lower-output Scrypt hardware

Replacing an older Scrypt ASIC with this model raises hash rate significantly while consolidating power into a single 3425W device. The jump is worth it when your electricity cost allows the higher draw to be offset by the 9500 MH/s throughput. First manufacturer listing was January 2026.

Check power, cooling and network before ordering

Verify that your facility can supply 3425W continuously and that ambient temperature stays between 5 and 45 °C with humidity from 5 to 95 %. Ensure rack or shelf space fits the 195 x 290 x 370mm footprint and that 75db noise is acceptable for the site. A stable wired network connection is required for pool communication.

Helstu kostir

  • 9500 MH/s hash rate powers profitable Litecoin and Dogecoin mining
  • 3425 W power draw defines the energy cost per coin earned
  • 75 dB noise level requires dedicated ventilation or remote siting
  • 195 x 290 x 370 mm footprint fits standard 19-inch rack shelves
  • 15 kg weight allows single-person installation and rack mounting

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

What are the exact dimensions and weight of the Antminer L7?

The unit measures 195 x 290 x 370 mm and weighs 15 kg, so allow that footprint and load capacity on your shelf or rack.

How is the Antminer L7 installed and what is the common mistake?

Connect the included PSU to a suitable 3425 W circuit, link Ethernet, then power on; the frequent error is using an undersized breaker or cable that trips under continuous load.

What maintenance will the Antminer L7 need over time?

Operate within 5 to 45 °C and 5 to 95 % humidity; clean dust from the intake regularly and monitor fan noise at 75 dB for bearing wear.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.