Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

Brute Networks

Brute Networks 128GB DDR4-2933 4Rx4 1.2v ECC LRDIMM HP P19047-B21

SKU CH-G3R1-FV8JP

128 GB DDR4-2933 4Rx4 ECC load-reduced DIMM runs at 1.2 V for high-density server memory upgrades

  • Capacity128GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR3 2933 (PC3 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 128GB capacity supports dense virtualization workloads
  • DDR4-2933 speed delivers high memory bandwidth
  • 4Rx4 Load Reduced design enables maximum density per slot
  • 20V operation reduces power draw per module
  • HP P19047-B21 compatible for validated integration

High-capacity server memory

Brute Networks 128GB DDR4-2933 4Rx4 1.2v ECC LRDIMM is a 288-pin module built for HP platforms using part number P19047-B21. It targets administrators who need maximum installed memory per slot to support dense virtualization or large in-memory databases. The load-reduced design reduces electrical load on the memory bus, allowing higher total capacity than standard registered DIMMs.

Thermals noise and power

Operating at 1.2V, the module draws minimal power for its density, helping keep server power budgets predictable. Load-reduced buffering lowers signal contention, which contributes to stable operation under sustained workloads. ECC circuitry corrects single-bit errors in real time, preventing data corruption without adding measurable latency. No active cooling is required beyond standard server airflow.

Build quality and connectors

Major-brand DRAM from Samsung, SK Hynix or Micron ensures component consistency across the module. The 4Rx4 organization packs 128GB into a single 288-pin DDR4 form factor, fitting existing DIMM slots without adapter brackets. Third-party validation guarantees compatibility with HP service contracts, so firmware updates and support agreements remain intact. Lifetime warranty backs the hardware for the server's service life.

Helstu kostir

  • 128GB capacity supports dense virtualization workloads
  • DDR4-2933 speed delivers high memory bandwidth
  • 4Rx4 Load Reduced design enables maximum density per slot
  • 20V operation reduces power draw per module
  • HP P19047-B21 compatible for validated integration

Tæknilýsing

BrandHP
Capacity128GB
Type288-Pin DDR4 SDRAM
SpeedDDR3 2933 (PC3 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset

Spurningar um þessa vöru

How do I install the 288-pin DDR4 LRDIMM and which step is often missed?

Align the notch with the slot key, press straight down until both side clips click, then verify the server BIOS recognises 128 GB at 2933 MT/s; the step often missed is enabling the correct memory voltage of 1.20 V in BIOS

What maintenance or replacement will the 4Rx4 ECC module need later?

No scheduled maintenance is required; if a correctable error count climbs or the module fails POST, replace it with an identical 128 GB PC4-23400 4Rx4 1.20 V LRDIMM

What limit appears first when the LRDIMM runs sustained workloads at 2933 MT/s?

The JEDEC voltage ceiling of 1.20 V is reached first; the memory controller will throttle frequency before thermal limits are hit

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.