Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 288-pin DDR4 UDIMM module with black chips and gold contacts

Brute Networks

Brute Networks 16GB DDR4-2133 2Rx8 1.2V Non-ECC UDIMM

SKU CH-EQ7X-06Q8Z

16GB DDR4-2133 non-ECC UDIMM module with CL15 timing and 1.2V operation

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo
  • 16 GB DDR4-2133 CL15 for faster application loading
  • 2Rx8 dual-rank layout boosts multitasking throughput
  • 20 V operation keeps power draw low
  • 288-pin UDIMM fits standard DDR4 desktop slots
  • HP Y3X96AA equivalent ensures drop-in compatibility

16GB DDR4-2133 UDIMM for HP servers

This 16GB DDR4 module runs at 2133MHz with CL15 latency and 1.20V operation. It uses a 2Rx8 unregistered design on a 288-pin UDIMM form factor. The stick is built with major-brand chips and matches HP part number Y3X96AA for direct replacement.

Thermals noise and power draw

Standard DDR4 voltage of 1.20V keeps power draw low during typical server workloads. Unbuffered layout avoids the extra register heat found on registered DIMMs. Passive cooling relies on chassis airflow, so noise depends entirely on the host system fans.

Upgrade path and value

Replaces lower-capacity DDR4-2133 non-ECC UDIMMs in compatible HP platforms. The jump is worth it when current memory limits multitasking or data-intensive tasks. Not for systems requiring ECC, registered modules, or speeds beyond 2133MHz.

Helstu kostir

  • 16 GB DDR4-2133 CL15 for faster application loading
  • 2Rx8 dual-rank layout boosts multitasking throughput
  • 20 V operation keeps power draw low
  • 288-pin UDIMM fits standard DDR4 desktop slots
  • HP Y3X96AA equivalent ensures drop-in compatibility

Tæknilýsing

BrandHP
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset

Spurningar um þessa vöru

How do I install this 288-pin DDR4 UDIMM and what step is often missed?

Power off the system, open the case, align the notch on the 288-pin DDR4 module with the slot key, press firmly until both retention clips click, then verify the module is seated evenly before closing the case.

What maintenance or replacement will this 16GB non-ECC module need later?

No scheduled maintenance is required; if errors appear, run a memory diagnostic and replace the module if faults are confirmed, otherwise it runs for the system's life.

What limit appears first on this CL15 1.20V kit under sustained load?

The DDR4-2133 CL15 timing and 1.20V voltage set the throughput ceiling; sustained heavy workloads will hit that bandwidth limit before thermal throttling becomes a factor.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.