Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

Buffalo Technology

Buffalo Technology OP-HD3.0QH 3TB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-GWCK-3TJ8Z MPN OP-HD3.0QH

3 TB desktop drive with SATA 3.0 Gb/s interface in a 3.5 inch form factor

  • InterfaceSATA 3.0Gb/s
  • Capacity3TB
  • Form Factor3.5"
  • Height (maximum)1.18" (30 mm)
  • Width (maximum)4.13" (104.9 mm)
  • Length (maximum)6.70" (170.2 mm)
  • 3TB capacity stores large media libraries and backups
  • SATA 3.0Gb/s interface provides reliable data transfer for desktop systems
  • Standard 3.5-inch form factor fits most desktop drive bays
  • Slim 1.18-inch height allows installation in compact chassis
  • Available since 2015 as a proven storage solution

Three-terabyte desktop storage

The Buffalo Technology OP-HD3.0QH is a 3.5 inch internal hard drive with a 3TB capacity and a SATA 3.0Gb/s interface. It fits standard desktop drive bays measuring up to 1.18 inches high, 4.13 inches wide and 6.70 inches long. This drive suits users adding bulk storage to a workstation or home server.

Sustained write behaviour

The SATA 3.0Gb/s link sets the ceiling for continuous data transfer during long copy or backup jobs. Mechanical throughput will vary with file size and fragmentation but remains consistent across the full 3TB span. The drive handles sequential workloads such as media archiving or disk imaging without the thermal throttling seen in smaller form factors.

Thermals and power in use

A 3.5 inch mechanism running at 30 mm height dissipates heat through the metal chassis into the case airflow. Acoustic output stays at typical desktop levels during idle and seek operations. Power draw follows the SATA specification for 3.5 inch devices, requiring only the standard 12 V and 5 V rails from the system supply.

Helstu kostir

  • 3TB capacity stores large media libraries and backups
  • SATA 3.0Gb/s interface provides reliable data transfer for desktop systems
  • Standard 3.5-inch form factor fits most desktop drive bays
  • Slim 1.18-inch height allows installation in compact chassis
  • Available since 2015 as a proven storage solution

Tæknilýsing

BrandBUFFALO
ModelOP-HD3.0QH
InterfaceSATA 3.0Gb/s
Capacity3TB
Form Factor3.5"
Height (maximum)1.18" (30 mm)
Width (maximum)4.13" (104.9 mm)
Length (maximum)6.70" (170.2 mm)
Sendingarþyngd1.00 kg
Stærð sendingar208 × 144 × 69 mm

Spurningar um þessa vöru

How much power and heat does the 3TB SATA 3.0Gb/s drive produce when running continuously?

The 3.5" drive fits standard desktop bays at 1.18" high, 4.13" wide and 6.70" long, drawing typical SATA power levels for a 3TB mechanical disk.

What motherboard connector and bay size are required to install this 3.5" SATA drive?

A free SATA 3.0Gb/s port and a 3.5" drive bay measuring at least 1.18" high, 4.13" wide and 6.70" deep are needed.

Will this SATA 3.0Gb/s drive work in a system that only has SATA 1.5Gb/s ports?

Yes, the SATA 3.0Gb/s interface is backward compatible with older 1.5Gb/s ports, operating at the slower speed.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.