Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 100-pin SODIMM memory module with black chips

Computer Memory Solutions

Computer Memory Solutions 512MB DDR 333 (PC2700) SODIMM 100-Pin memory upgrade

SKU CH-1J0B-5M4CJ

512 MB DDR 333 SODIMM upgrade for Kyocera FS-9130N, FS-9530N, KM-C3225 and FS-C8100D printers

  • Capacity512MB
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Timing3-3-3
  • Voltage2.5V
  • ECCNo
  • 512 MB capacity supports larger workloads in compatible Kyocera printers
  • DDR 333 (PC2700) speed matches original system specifications
  • CL2.5 CAS latency with 3-3-3 timing for responsive memory access
  • 100-pin SODIMM form factor fits designated Kyocera printer models
  • Unbuffered non-ECC design ensures correct operation in target devices

Compatible Kyocera printer upgrade

This 512 MB SODIMM module is built for Kyocera FS-9130N, FS-9530N, KM-C3225 and FS-C8100D printers. It adds a single stick of DDR 333 (PC2700) memory to systems that accept 100-pin unbuffered non-ECC modules. Installation is a straightforward slot insertion.

Suits owners of listed Kyocera models

Printers outside the four named models cannot be guaranteed to work with this part. Buyers who need ECC, registered memory or a different pin count should look elsewhere. The stick is sold as a single piece, so configurations requiring matched pairs are not served by this item.

100-pin DDR 333 SODIMM form factor

The module uses a 100-pin SODIMM edge connector and runs at 2.5 V with CL2.5 timing. Only systems designed for this exact pin layout and voltage will recognise the upgrade. Verify the printer’s service manual before purchasing.

Helstu kostir

  • 512 MB capacity supports larger workloads in compatible Kyocera printers
  • DDR 333 (PC2700) speed matches original system specifications
  • CL2.5 CAS latency with 3-3-3 timing for responsive memory access
  • 100-pin SODIMM form factor fits designated Kyocera printer models
  • Unbuffered non-ECC design ensures correct operation in target devices

Tæknilýsing

BrandComputer Memory Solutions
ModelCM512MBPC2700100PIN
Capacity512MB
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Timing3-3-3
Voltage2.5V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemKyocera Fs-9130N, Fs-9530N, Km-C3225, Fs-C8100Dn
Package Content1 Memory RAM Stick

Spurningar um þessa vöru

What speed does the PC2700 100-pin SODIMM run at?

The module operates at 333 MHz, matching the PC2700 standard for DDR SODIMM memory.

Which Kyocera printers accept this 100-pin DDR SODIMM?

It is compatible with Kyocera FS-9130N, FS-9530N, KM-C3225 and FS-C8100D models.

How is the 512MB SODIMM installed and what step is often missed?

Power off the printer, open the memory cover, insert the stick at an angle until the clips snap, then close the cover before powering on.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.