Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR4 DIMM sticks, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 64GB (4x16GB) DDR4 2400 CL17 memory upgrade

SKU CH-2FH6-48YDC

A 64 GB DDR4 kit of four 16 GB unbuffered DIMMs running at 2400 MHz CL17 for select ASRock C236 and E3C236 workstation boards

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 64 GB total capacity from four 16 GB modules
  • DDR4 2400 speed rated at PC4 19200 bandwidth
  • CL17 latency with 17-17-17 timing for responsive operation
  • 2 V unbuffered non-ECC DIMMs using 288-pin form factor
  • Validated compatibility across listed ASRock C236 and E3C236 workstation platforms

64GB DDR4 Kit for ASRock Workstations

This 64GB kit contains four 16GB DDR4 2400 unbuffered DIMMs built to run at 1.2V with CL17 timings. It is manufactured by Computer Memory Solutions and validated for a specific list of ASRock C236 and E3C236 series motherboards. The modules use major brand chipsets and carry a limited lifetime warranty from the maker.

Suited for C236 Workstation Upgrades

The kit targets administrators or integrators populating all four slots on supported ASRock boards to reach the platform 64GB maximum. Buyers who need ECC error correction, registered modules or speeds above 2400MHz should look at a different product. Systems that require fewer than four modules or a lower total capacity are also not the intended use case.

Drop-In DDR4 288-Pin Installation

Each stick fits a standard 288-pin DDR4 slot with no heat spreader to interfere with tight CPU coolers. The 1.2V operation matches the platform default so no manual voltage tuning is required. Filling every slot leaves no free sockets for later expansion, so plan the final capacity before installing the kit.

Helstu kostir

  • 64 GB total capacity from four 16 GB modules
  • DDR4 2400 speed rated at PC4 19200 bandwidth
  • CL17 latency with 17-17-17 timing for responsive operation
  • 2 V unbuffered non-ECC DIMMs using 288-pin form factor
  • Validated compatibility across listed ASRock C236 and E3C236 workstation platforms

Tæknilýsing

BrandComputer Memory Solutions
ModelCM2048642400DIMM
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemASRock C236 WS, C236M WS, D1540D4U-2L+, E3C232D4U, E3C232D4U-V1L, E3C232D4U-VF, E3C236D4HM-2L+, E3C236D4HM-2T, E3C236D4M-4L, E3C236D4U
Package Content4 Memory RAM Sticks

Spurningar um þessa vöru

Does my ASRock motherboard need four free DDR4 DIMM slots for this 4x16GB kit?

The kit contains four 288-pin DDR4 modules, so your board must provide four empty DDR4 DIMM sockets to install all 64GB at once.

Can I keep my existing DDR4 2400 CL17 sticks and add this 64GB kit?

Mixing modules with identical speed, latency and voltage usually works, but the board will run all sticks at the slowest common timing; for guaranteed stability use the four matched sticks alone.

How do I confirm the system sees the full 64GB after installation?

Boot the machine, open BIOS or the OS memory report, and verify the total shows 64GB running at 2400MHz with 17-17-17 timings at 1.2V.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.