Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green 128MB 144-pin SODIMM memory module with black chips

Computer Memory Solutions

Computer Memory Solutions CM1664PC133SO 128MB 144-Pin SDR SO-DIMM PC133 memory upgrade

SKU CH-EK5D-FE1TC

128 MB 144-pin SDR SO-DIMM running at 133 MHz for HP DesignJet 500, 500PS, 800 and 800PS printers

  • Capacity128MB
  • Type144-Pin SDR SO-DIMM
  • SpeedPC 133
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor Brand Chipset
  • 128 MB capacity adds working memory to supported HP DesignJet printers
  • 133 MHz PC133 speed matches the bus specification of the listed plotters
  • 144-pin SDR SO-DIMM form factor fits the memory slot on compatible models
  • Unbuffered non-ECC design meets the printer manufacturer requirements
  • Genuine Computer Memory Solutions module with lifetime warranty from the brand

Compatible Memory Upgrade

This 128MB SDRAM SO-DIMM module is built for HP DesignJet 500, 500Ps, 800 and 800Ps large-format printers. It also fits Business InkJet 2230, 2280, 2280tn and 2600dn models. The 144-pin unbuffered stick installs directly into the printer’s memory slot to expand the available buffer for complex print jobs.

Low-Power Operation

The module runs at 133 MHz with a standard 3.3V supply and no heat spreader. Non-ECC, unbuffered SDR chips keep power draw minimal inside the enclosed printer chassis. Passive cooling is sufficient because the component generates very little heat during normal printing workflows.

Sustained Print Performance

Under continuous, high-resolution output the extra 128MB buffer reduces data starvation and keeps the print engine fed without pauses. The single-stick upgrade is validated for the listed HP models; printers that require a different pin count, voltage or capacity will not accept this module.

Helstu kostir

  • 128 MB capacity adds working memory to supported HP DesignJet printers
  • 133 MHz PC133 speed matches the bus specification of the listed plotters
  • 144-pin SDR SO-DIMM form factor fits the memory slot on compatible models
  • Unbuffered non-ECC design meets the printer manufacturer requirements
  • Genuine Computer Memory Solutions module with lifetime warranty from the brand

Tæknilýsing

BrandComputer Memory Solutions
ModelCM1664PC133SO
Capacity128MB
Type144-Pin SDR SO-DIMM
SpeedPC 133
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Designjet 500, 500Ps, 800, 800Ps C2388A
Package Content1 Memory RAM Stick

Spurningar um þessa vöru

How do I install the 144-pin SODIMM in my HP DesignJet 500 and what step is often missed?

Power off the printer, open the memory cover, align the notch on the 144-pin SODIMM with the slot key, press firmly until both side clips click, then verify the new 128 MB total in the front-panel menu.

What maintenance or replacement will this 128 MB PC133 module need over time?

No routine maintenance is required; if the printer later shows memory errors or fails to recognise the 128 MB, replace the module with another 144-pin PC133 SODIMM.

What limit appears first when the DesignJet 800 runs large raster jobs continuously with this memory?

The 128 MB capacity fills first, forcing the printer to spool to disk and slowing output on complex pages.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.