Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green circuit boards with gold connectors and black chips

Computer Memory Solutions

Computer Memory Solutions CM5126410600SODRH 8GB (2x4GB) DDR3 1333 CL7 memory upgrade

SKU CH-PJ1K-PHN14

8GB DDR3 SO-DIMM kit with CL7 timing for HP TouchSmart 300-1025 series

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 8GB kit expands HP TouchSmart 300-1025 to maximum memory
  • CL7 7-7-7 timing delivers low-latency DDR3 1333 performance
  • 204-pin SO-DIMM form factor fits factory memory slots directly
  • Unbuffered non-ECC design matches original system specification
  • Major-brand chipset components ensure reliable operation at 1.5V

Targeted DDR3 SO-DIMM kit

This 8 GB kit contains two 4 GB unbuffered 204-pin DDR3 SO-DIMMs rated at 1333 MHz with CL7 7-7-7 timings at 1.5 V. It is built specifically for HP TouchSmart 300-1025, 300-1025be, 300-1025ch and 300-1025de all-in-one desktops. The two-rank 2Rx8 modules use major-brand chips and ship without heat spreaders.

Buyers matching the listed TouchSmart models

Owners of the exact TouchSmart models shown can install this pair to reach the platform maximum of 8 GB, though a 64-bit operating system is required to address the full capacity. Systems limited to DDR3-1066/PC3-8500 will down-clock the modules automatically. Builders working on other platforms, laptops needing ECC or registered SO-DIMMs, or users requiring different pin counts or voltages should look at different memory.

Speed grade PC3-10600 at CL7

The decisive specification is the DDR3-1333 PC3-10600 speed combined with a CL7 7-7-7 latency at 1.5 V. This exact timing and voltage match the TouchSmart memory controller, allowing the system to run at its rated frequency without manual adjustment. If your board only supports DDR3-1066 the modules will still function but at the lower speed.

Helstu kostir

  • 8GB kit expands HP TouchSmart 300-1025 to maximum memory
  • CL7 7-7-7 timing delivers low-latency DDR3 1333 performance
  • 204-pin SO-DIMM form factor fits factory memory slots directly
  • Unbuffered non-ECC design matches original system specification
  • Major-brand chipset components ensure reliable operation at 1.5V

Tæknilýsing

BrandComputer Memory Solutions
ModelCM5126410600SODRH
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Touchsmart 300-1025, 300-1025Be 300-1025Ch, 300-1025De
Package Content2 Memory RAM Sticks

Spurningar um þessa vöru

How can I verify the CM5126410600SODRH kit is running at DDR3 1333 CL7 after installation?

Enter the BIOS or use a tool such as CPU-Z and confirm the memory frequency reads 1333 MHz with timings of 7-7-7 at 1.5 V.

What does the package contain and is anything else required for the HP TouchSmart 300-1025?

The box includes two 4 GB 204-pin DDR3 SO-DIMM sticks; no extra parts are needed for the listed TouchSmart models.

Should I choose the 8 GB (2 x 4 GB) kit or a different capacity for the TouchSmart 300-1025?

The system maximum is 8 GB across its two slots, so this 2 x 4 GB kit fills the board completely.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.