Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
All-aluminium E-ATX mid-tower chassis with DIY pixel cube panel

Corn Electronics

Corn Electronics Pixel One CNCC All Aluminum E-ATX Mid Tower PC Case

SKU CH-BMR8-PN4V7

All-aluminium E-ATX mid-tower with room for 420 mm GPU, 180 mm cooler, two 3.5" and one 2.5" drive, plus extensive 120 mm and 140 mm fan mounts

  • TypeE-ATX Mid Tower Chassis
  • Case MaterialAluminum
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays1
  • Max GPU Length420 mm
  • Max CPU Cooler Height180 mm

Options Pixel One (Black)

  • All-aluminium frame keeps weight low while staying rigid
  • Fits E-ATX boards plus ATX, micro-ATX and mini-ITX
  • 420 mm GPU clearance handles the longest graphics cards
  • 180 mm CPU cooler height covers most tower coolers
  • Front panel gives USB-C, USB 3.0 and audio in one strip

Build foundation

The Corn Electronics Pixel One CNCC is an all-aluminium E-ATX mid-tower chassis designed for enthusiasts who want a premium metal structure for high-end custom-loop or air-cooled builds. It accommodates E-ATX, ATX, Micro-ATX and Mini-ITX motherboards in a rigid, lightweight frame.

Pre-build checklist

Verify that your graphics card measures no more than 420 mm in length and that your CPU cooler does not exceed 180 mm in height. Confirm the motherboard form factor matches the supported standards and plan drive placement around two 3.5-inch bays and one 2.5-inch bay. Ensure the front-panel header provides a USB 3.0 connection, a Type-C connection and an audio jack for the top I/O.

Sustained thermal behaviour

The chassis supports up to three 140 mm or 120 mm fans at the top, two 140 mm or three 120 mm fans at the bottom and a single 120 mm fan at the rear, allowing high-volume airflow across radiators or heatsinks during extended workloads. Aluminium construction helps dissipate heat quickly, so internal temperatures stabilise faster than in steel alternatives when the fan array runs at constant speed.

Helstu kostir

  • All-aluminium frame keeps weight low while staying rigid
  • Fits E-ATX boards plus ATX, micro-ATX and mini-ITX
  • 420 mm GPU clearance handles the longest graphics cards
  • 180 mm CPU cooler height covers most tower coolers
  • Front panel gives USB-C, USB 3.0 and audio in one strip

Tæknilýsing

TypeE-ATX Mid Tower Chassis
Case MaterialAluminum
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Max GPU Length420 mm
Max CPU Cooler Height180 mm

Aðrar útgáfur af þessari vöru

4 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the Pixel One CNCC include any fans or do I need to buy 120 mm and 140 mm fans separately?

The case supports up to three 140 mm or 120 mm fans at the top, two 140 mm or three 120 mm fans at the bottom, and one 120 mm fan at the rear; no fans are included so you must purchase them yourself.

Which motherboard form factors fit inside the 420 mm GPU clearance and 180 mm CPU cooler height limits?

The chassis accepts E-ATX, ATX, Micro-ATX and Mini-ITX boards while still leaving room for graphics cards up to 420 mm long and air coolers up to 180 mm tall.

How many 3.5-inch hard drives and 2.5-inch SSDs can I actually install once the front panel and bottom fans are mounted?

You can fit two 3.5-inch drives and one 2.5-inch drive in the dedicated internal bays regardless of the fan configuration you choose.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.