Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Dell FNW88 1 TB 3.5 inch SAS hard drive in hot-swap tray

DELL

DELL FNW88 1 TB 3.5" 7200 RPM SAS internal hard drive

SKU CH-SM94-CQ4HY

A 3.5 inch SAS hard drive with 1 TB capacity, 7200 RPM spindle speed and hot-swap tray included

  • 1 TB capacity for bulk storage
  • 7200 rpm spindle speed for responsive data access
  • 6Gb/s SAS interface for enterprise connectivity
  • 5 inch hot-swap tray for tool-less drive replacement
  • New condition ready for immediate deployment

Dell FNW88 1 TB SAS Hard Drive

The Dell FNW88 is a 3.5 inch internal hard drive with a 1 TB capacity and a 7200 rpm spindle speed. It uses a 6Gb/s SAS interface and arrives mounted in a hot-swap tray for large-form-factor bays. This new drive suits servers and storage arrays that require serial attached SCSI connectivity.

Who this suits and who should look elsewhere

This drive fits administrators expanding SAS-based storage pools or replacing failed units in compatible hot-swap chassis. The 7.2k rpm spindle provides consistent throughput for bulk data, backups and archival workloads. Buyers whose systems lack a SAS controller or an available 3.5 inch hot-swap bay cannot install this drive.

The specification that decides fit

The 6Gb/s SAS interface is the single factor that determines compatibility. The drive will only function when connected to a backplane or controller that supports serial attached SCSI at that signalling rate. Verify the host hardware provides a SAS port and a large-form-factor hot-swap slot before purchase.

Helstu kostir

  • 1 TB capacity for bulk storage
  • 7200 rpm spindle speed for responsive data access
  • 6Gb/s SAS interface for enterprise connectivity
  • 5 inch hot-swap tray for tool-less drive replacement
  • New condition ready for immediate deployment

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

How do I verify the FNW88 is spinning at 7200 RPM after installation?

Listen for the characteristic 7200 RPM spindle sound and check the SAS controller BIOS or OS disk utility to confirm the drive reports a 6Gb/s link speed and 1 TB capacity.

What comes in the box with the FNW88 and what must I source separately?

The drive ships mounted in a hot-swap tray; you must supply a compatible 3.5 inch SAS backplane or cage, SAS data and power cables, and a 6Gb/s SAS HBA or RAID controller.

Which capacity version of the FNW88 should I choose for a Dell PowerEdge server bay?

This listing is the 1 TB model; select it when you need a single 1 TB LFF SAS drive — other capacities are different part numbers.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.