Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Dell PowerEdge M630 blade server, matte black finish, rectangular form factor, front drive bays visible

DELL

DELL PowerEdge M630 Blade Server 2x Xeon E5-2697A v4 256GB DDR4 2x 1TB SATA

SKU CH-YNBS-6E3VY

Blade server with dual 16-core Xeon CPUs, 256 GB DDR4 and two 1 TB SATA drives

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.6 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size256GB
  • Dual Xeon E5-2697A v4 processors with 16 cores each handle demanding workloads
  • 256 GB DDR4 ECC registered memory supports large datasets and virtualisation
  • 2 × 1 TB SATA 7.2K drives provide redundant storage capacity
  • PERC H330 RAID controller manages drive arrays with hardware acceleration
  • iDRAC8 Enterprise enables remote monitoring and management over network

Dell PowerEdge M630 Blade Server

The Dell PowerEdge M630 is a dual-socket blade server built for dense compute in a shared chassis. It ships with two Xeon E5-2697A v4 processors running at 2.6 GHz and 256 GB of DDR4 memory across the maximum two processor sockets.

Ideal for virtualisation clusters

This server suits teams that need high core counts and large memory capacity within a blade form factor. It is not for buyers who require GPU acceleration, more than two 2.5-inch drive bays, or a standalone tower or rack-mount chassis.

256 GB DDR4 installed with 512 GB maximum

The system arrives with 256 GB of DDR4 ECC registered memory installed and supports a maximum of 512 GB across its DIMM slots. This ceiling determines whether the blade can absorb your dataset growth without a hardware change.

Helstu kostir

  • Dual Xeon E5-2697A v4 processors with 16 cores each handle demanding workloads
  • 256 GB DDR4 ECC registered memory supports large datasets and virtualisation
  • 2 × 1 TB SATA 7.2K drives provide redundant storage capacity
  • PERC H330 RAID controller manages drive arrays with hardware acceleration
  • iDRAC8 Enterprise enables remote monitoring and management over network

Tæknilýsing

BrandDELL
SeriesPowerEdge
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.6 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4 SDRAM
Max Memory Capacity512GB
Hard Drive (Installed)2,00
Storage ControllerDell PERC H330 SAS Storage Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 Enterprise
Dimensions22 x 22x 10 in
Weight20

Spurningar um þessa vöru

Will the dual Xeon E5-2697A v4 processors and 256GB DDR4 fit within the M630's two-socket limit and 512GB maximum memory?

Yes. The M630 supports a maximum of two processors and 512GB of DDR4, so the installed 2x E5-2697A v4 CPUs and 256GB of memory are within the blade's rated capacity.

How can I confirm the PERC H330 controller sees both 1TB SATA drives and the iDRAC8 Enterprise is reachable?

During POST the H330 BIOS lists each 1TB SATA drive; press the designated key to enter the controller utility and verify both appear. Then open a browser to the iDRAC8 IP address — the login screen confirms remote management is active.

Does the blade ship with the two 1TB SATA drives and 256GB DDR4 already installed, or must I add them myself?

The unit arrives with both 1TB SATA 7.2K 2.5-inch drives and the full 256GB of DDR4 ECC registered memory pre-installed; no additional memory or drive installation is required for the listed configuration.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.