Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

DELL

DELL ST4000NM0005 4TB 7200RPM 12Gbps 3.5" SAS internal hard drive

SKU CH-Q518-JA43W

4 TB enterprise SAS drive spinning at 7200 RPM with a 12 Gb/s interface for PowerEdge Gen 13 servers

  • 4 TB capacity stores large enterprise datasets
  • 7 200 RPM spindle delivers fast sequential access
  • 12 Gb/s SAS interface moves data at high throughput
  • 5 inch form factor fits standard server bays
  • Compatible with PowerEdge 13G servers including R230 R330 R430 R530 R630 R730xd R730 R930 T330 T430 T630

Dell 4 TB SAS enterprise drive

This Dell enterprise hard drive delivers 4 TB of storage on a 3.5 inch SAS 12 Gb/s interface spinning at 7200 RPM. It is built for PowerEdge Gen13 servers and ships new from the supplier. The part number is ST4000NM0005 and the Dell ordering codes are XWM1W and 0XWM1W.

Fits PowerEdge Gen13 rack and tower models

Compatible systems include the R230, R330, R430, R530, R630, R730, R730xd and R930 rack servers plus the T330, T430 and T630 tower servers. Buyers whose chassis only accept 2.5 inch drives or who need a different interface should look at something else.

SAS 12 Gb/s interface decides fit

The drive connects through a 3.5 inch SAS 12 Gb/s port so the host must provide that exact interface. Without a SAS 12 Gb/s backplane or controller the drive will not work.

Helstu kostir

  • 4 TB capacity stores large enterprise datasets
  • 7 200 RPM spindle delivers fast sequential access
  • 12 Gb/s SAS interface moves data at high throughput
  • 5 inch form factor fits standard server bays
  • Compatible with PowerEdge 13G servers including R230 R330 R430 R530 R630 R730xd R730 R930 T330 T430 T630

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

What SAS controller or backplane do I need to run this 12Gbps drive?

A SAS controller or backplane that supports 12Gb/s SAS is required for full speed; the drive will negotiate down to 6Gb/s on older SAS infrastructure.

Can I install this 3.5" SAS drive in a PowerEdge R720 that I already own?

No, the R720 is a Generation 12 system; this drive is validated only for Generation 13 PowerEdge servers such as the R730 and R730xd.

How can I verify the drive is running at 12Gbps after installation?

Check the negotiated link speed in the RAID controller BIOS, iDRAC storage inventory, or the OS SAS topology tool — it should report 12Gb/s for this ST4000NM0005.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.