Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Compact silver heatsink with vapor chamber base and stacked aluminum fins

Dynatron

Dynatron R23 CPU cooler 5.25"x4.25"x3.5" 0.97 lbs

SKU CH-C10Y-38PPV MPN R23

A vapor-chamber heatsink with stacked aluminium fins measuring 5.25 by 4.25 by 3.5 inches and weighing 0.97 lbs

  • TypeHeatsinks only
  • Heatsink MaterialVapor Chamber Base with AluminumStacked Fin
  • Heatsink Dimensions5.25"x4.25"x3.5"
  • Weight0.97 lbs
  • Vapor chamber base spreads heat rapidly from the CPU
  • Stacked aluminium fins increase surface area for efficient passive dissipation
  • Compact 5.25" x 4.25" x 3.5" footprint fits tight chassis spaces
  • Light 0.97 lbs weight reduces motherboard mounting stress
  • Heatsink-only design allows custom fan selection for noise or airflow priorities

Vapor chamber heatsink

The Dynatron R23 is a CPU air cooler built around a vapor chamber base paired with aluminum stacked fins. It measures 5.25 by 4.25 by 3.5 inches and weighs .97 lbs. The unit is supplied as a heatsink only, without an integrated fan. This design targets systems where a separate airflow solution is preferred.

Passive cooling builds

The heatsink suits builders assembling passively cooled or semi-passive workstations who will add their own fan or rely on chassis airflow. It also fits replacement scenarios where the original mounting hardware is retained. Buyers needing an all-in-one cooler with a pre-installed fan should look elsewhere.

Vapor chamber base

The defining specification is the vapor chamber base combined with aluminum stacked fins, which spreads heat from the CPU lid into the fin array. This construction determines the thermal capacity available before active airflow is added. Verify that your socket mounting pattern matches the heatsink footprint before purchase.

Helstu kostir

  • Vapor chamber base spreads heat rapidly from the CPU
  • Stacked aluminium fins increase surface area for efficient passive dissipation
  • Compact 5.25" x 4.25" x 3.5" footprint fits tight chassis spaces
  • Light 0.97 lbs weight reduces motherboard mounting stress
  • Heatsink-only design allows custom fan selection for noise or airflow priorities

Tæknilýsing

BrandDynatron
ModelR23
TypeHeatsinks only
Heatsink MaterialVapor Chamber Base with AluminumStacked Fin
Heatsink Dimensions5.25"x4.25"x3.5"
Weight0.97 lbs
Sendingarþyngd0.44 kg
Stærð sendingar132 × 112 × 91 mm

Spurningar um þessa vöru

What mounting hardware is required to install the R23 heatsink on my CPU socket?

The R23 is supplied as a heatsink only; you must provide the correct retention brackets, back-plate and screws that match your specific motherboard socket.

Will the R23's 5.25 by 4.25 inch footprint clear tall RAM modules or VRM heatsinks on an older board?

At 5.25 by 4.25 inches the base covers a large area; measure the space around your socket to confirm clearance for memory sticks and voltage-regulator coolers.

How can I verify the vapor chamber base is making proper contact after mounting the R23?

Check that idle and load temperatures drop to expected levels for your CPU and that the heatsink feels evenly warm across the fin stack during operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.