Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Warm white 1.75 mm ASA+ filament on a 1 kg spool

eSUN

eSUN ASA+ Filament 1.75mm Warm White 1KG 3d printers accessory

SKU CH-R87C-2068A

Weather-resistant ASA+ filament in 1.75 mm diameter on a 1 kg spool for durable outdoor prints

  • ColorWarm White
  • TypeASA+ Filament
  • Specification1.75mm
  • FeaturesImproved ASA+ Filament, Excellent Weather Resistance
  • Excellent weather resistance for durable outdoor prints
  • Improved interlayer strength and bridging for reliable parts
  • Tangle-free spool ensures smooth, clog-free feeding
  • High dimensional accuracy with low warping for stable results
  • Suitable for functional parts like tools and enclosures

ASA+ Filament 1.75 mm 1 kg Warm White

eSUN ASA+ filament is a weather-resistant thermoplastic engineered for outdoor and functional prints. The 1.75 mm diameter spool weighs 1 kg and comes in a Warm White colour. Modified ASA chemistry gives better layer adhesion and bridging than standard ASA.

Makers needing UV-stable parts.

This material suits builders producing drone frames, garden fixtures, automotive trim or any part exposed to sun and rain. Buyers without a heated chamber or enclosed printer should look elsewhere because the filament shrinks noticeably and warps on open frames.

Large shrinkage rate demands temperature control

The supplier notes a large shrinkage rate and recommends keeping a steady ambient temperature by printing inside a closed-box printer. Applying adhesive to the build plate is also advised to counter warping and ensure consistent first-layer adhesion.

Helstu kostir

  • Excellent weather resistance for durable outdoor prints
  • Improved interlayer strength and bridging for reliable parts
  • Tangle-free spool ensures smooth, clog-free feeding
  • High dimensional accuracy with low warping for stable results
  • Suitable for functional parts like tools and enclosures

Tæknilýsing

BrandeSUN
Model3D Printer Filament
ColorWarm White
TypeASA+ Filament
Specification1.75mm
FeaturesImproved ASA+ Filament, Excellent Weather Resistance

Spurningar um þessa vöru

What spool dimensions does the 1.75 mm ASA+ filament need on the printer?

The filament is supplied on a 1 kg spool weighing 2.2 lbs; check that your printer’s holder accepts that width and weight.

Which printer setting is critical when starting a print with this ASA+ material?

Keep the ambient temperature stable and use an enclosed printer; applying glue to the build plate helps prevent warping from the material’s high shrinkage rate.

How should the spool be stored between prints to avoid later feeding issues?

Store the filament in a sealed container with desiccant to keep it dry and tangle‑free, ensuring consistent feeding and no nozzle clogs.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.