Fans
Fans 125FZY2-SFrequency 135x135x32mm 220V 50Hz 25W 2250 RPM 45 dB-A case fan
A 135 mm square AC axial fan moves air through enclosures at 2250 RPM while producing 45 dB-A from a 25 W motor
- Axial airflow cools cabinets efficiently with 2250 RPM motor
- 25 W power draw keeps energy use low at 220 V
- 45 dB-A noise level suits quiet industrial environments
- Compact 135×135×32 mm frame fits standard 125 mm mounting holes
- 700 g lightweight build eases installation in tight enclosures
135x135x32 mm AC axial fan
This 135x135x32 mm axial fan is built for cabinet and industrial cooling rather than standard PC chassis. It runs on 220 V AC mains power at 50 Hz, so it suits equipment racks, medical devices or rail-vehicle enclosures where mains voltage is already present.
220 V 50 Hz mains voltage
The single specification that decides fit is the 220 V 50 Hz AC supply; the fan will not operate from a PC 12 V header or any DC source. Buyers who need a fan powered by a motherboard or fan controller cannot use this model.
Four-hole frame mounting
The square 135 mm frame accepts standard four-screw mounting, so installation is straightforward in panels cut to that pattern. The 25 W motor draws noticeable current, so wiring must be rated for mains voltage and secured against vibration; the 700 g weight also demands firm fixing to prevent noise from resonance.
Helstu kostir
- Axial airflow cools cabinets efficiently with 2250 RPM motor
- 25 W power draw keeps energy use low at 220 V
- 45 dB-A noise level suits quiet industrial environments
- Compact 135×135×32 mm frame fits standard 125 mm mounting holes
- 700 g lightweight build eases installation in tight enclosures
Tæknilýsing
Engin birt tæknilýsing fyrir þessa vöru enn.
Spurningar um þessa vöru
What does the 2250 RPM figure mean once the fan is installed in a cabinet?
It shows the motor runs at 2250 revolutions per minute on a 50 Hz supply, delivering a fixed airflow rate for steady cabinet cooling.
How does the 220 V 50 Hz AC supply affect what the fan can do?
The fan connects directly to 220 V 50 Hz mains, so speed and airflow are locked to line frequency with no PWM or voltage control.
Will the 135x135x32 mm frame fit my existing mounting holes?
The square frame measures 135 mm per side and 32 mm deep, so match those hole centres and depth before ordering.
Einnig í þessum vöruflokki
Fólk bar þetta saman
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



