BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
G.SKILL
32 GB dual-channel DDR5 kit running at 6400 MT/s with CL30 latency and 1.40 V AMD EXPO profile
This 32GB kit contains two 16GB DDR5 modules rated at 6400MT/s with CL30-39-39-102 timings at 1.40V. It targets AMD platforms using 600 or 800 series chipsets paired with Ryzen 9000 series processors. The silver UDIMM modules use AMD EXPO profiles to reach the rated overclock speed when enabled in the BIOS.
The kit is designed for systems that support AMD EXPO on Ryzen 9000 CPUs with compatible 600 or 800 series motherboards. It is not suited for Intel platforms or older AMD chipsets lacking EXPO support. Buyers needing ECC error correction or capacities beyond 32GB should look elsewhere. Stability at the rated speed depends on the specific motherboard and CPU combination used.
The decisive specification is the AMD EXPO profile rated at DDR5-6400 with CL30 latency at 1.40V. This profile only activates on validated motherboards running Ryzen 9000 series CPUs with 600 or 800 series chipsets. Without a compatible platform that supports EXPO, the modules will run at standard SPD speeds instead of the rated overclock. Check the G.Skill QVL for validated motherboard models before purchase.
Engin birt tæknilýsing fyrir þessa vöru enn.
The kit ships at the SPD speed and reaches 6400 MT/s CL30-39-39-102 at 1.40 V when you enable the AMD EXPO profile in BIOS, provided the motherboard and CPU can sustain that frequency.
EXPO stores the 6400 MT/s CL30 profile on the module; the firmware reads it and applies the voltage and timings automatically, but the final ceiling is still set by the memory controller and board trace quality.
Each module uses the standard 288-pin UDIMM form factor; the Royal Neo heatspreader adds height, so verify CPU-cooler and case clearance before installing the 2 x 16 GB sticks.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?