Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Red desktop DDR3 module with finned heat spreader

G.SKILL

G.SKILL Ripjaws X 8GB DDR3 1866 CL10 F3-14900CL10S-8GBXL desktop RAM

SKU CH-1SJC-8F6FF MPN F3-14900CL10S-8GBXL

8 GB DDR3 desktop module running at 1866 MT/s with CL10 timing and a red heat spreader

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL10
  • Timing10-11-10-30
  • Voltage1.50V
  • ECCNo
  • DDR3 1866 speed accelerates data throughput for demanding applications
  • CL10 latency with 10-11-10-30 timings reduces response delays
  • 50V operation balances performance and power efficiency
  • Intel XMP 2.0 profile enables automatic overclocking on supported platforms
  • Red heat spreader improves thermal dissipation while adding visual style

G.SKILL Ripjaws X DDR3 1866 CL10 8GB

This 8GB desktop memory module runs at DDR3 1866 with CL10 timing of 10-11-10-30 at 1.50V. It is an unbuffered, non-ECC DIMM with a red heat spreader and Intel XMP 2.0 support for automatic configuration. The kit is built for dual-channel systems using LGA1155 or AMD Llano and AM3+ platforms.

Ideal for DDR3 upgrades on LGA1155 or AM3+

Enthusiasts restoring or maintaining older Intel 2nd/3rd Gen Core or AMD Llano/AM3+ builds will match the rated speed and latency without manual tuning. Systems that require ECC, registered DIMMs, or a different DDR generation cannot use this module. Laptop or small-form-factor boards needing SO-DIMMs are also unsupported.

Speed and latency: DDR3 1866 CL10 10-11-10-30

The rated frequency of 1866 MT/s and tight CL10 timings decide whether this stick meets the performance target of the build. If the motherboard or CPU memory controller cannot run at this speed and latency, the module will fall back to lower JEDEC settings.

Helstu kostir

  • DDR3 1866 speed accelerates data throughput for demanding applications
  • CL10 latency with 10-11-10-30 timings reduces response delays
  • 50V operation balances performance and power efficiency
  • Intel XMP 2.0 profile enables automatic overclocking on supported platforms
  • Red heat spreader improves thermal dissipation while adding visual style

Tæknilýsing

BrandG.SKILL
SeriesRipjaws X Series
ModelF3-14900CL10S-8GBXL
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL10
Timing10-11-10-30
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ColorRed
Heat SpreaderYes
FeaturesCompatible with Intel LGA1155 and AMD Llano/AM3+ platforms
Intel XMP support for 2nd and 3rd Generation Intel Core Processors
Sendingarþyngd0.08 kg
Stærð sendingar248 × 206 × 19 mm

Spurningar um þessa vöru

Will this 8 GB DDR3-1866 module fit a motherboard with an Intel LGA 1155 socket?

Yes, the kit is validated for Intel LGA 1155 platforms and runs at 1.50 V with CL10 10-11-10-30 timings.

Does the memory support Intel XMP 2.0 for automatic configuration?

XMP 2.0 profiles are built in, so a compatible BIOS can load the rated 1866 MT/s speed and timings without manual entry.

Is the red heat spreader tall enough to interfere with larger CPU coolers?

The low-profile Ripjaws X spreader is designed to clear most tower coolers while still dissipating heat effectively.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.