Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
ATX motherboard with black PCB, silver heatsinks and I/O shield

GIGABYTE

GIGABYTE GA-970A-D3P AMD motherboard ATX AM3+ 970 chipset I/O shield included

SKU CH-6P1W-QE5DS MPN GA-970A-D3P

ATX motherboard with AMD 970 chipset and AM3+ socket, includes I/O shield

  • AM3+ socket supports compatible AMD processors
  • 970 chipset provides core platform features
  • ATX form factor fits standard cases
  • PCI Express x16 slot enables discrete graphics
  • I/O shield included for rear port protection

Socket AM3+ ATX motherboard

The GIGABYTE GA-970A-D3P is an ATX motherboard built on the AMD 970 chipset for Socket AM3+ processors. It targets builders assembling or repairing systems that use this platform. The board ships with an I/O shield and no other accessories.

Replaces an AM3+ board without M.2

This unit replaces a failed or missing Socket AM3+ motherboard in an existing chassis. The jump is worth it when the current board lacks a functional PCI Express x16 slot or has damaged rear I/O. It adds no M.2 slots and includes zero SATA cables.

Installs in a standard ATX case

Installation follows standard ATX mounting patterns using the board’s own screw holes. The missing accessory kit means you must supply SATA cables, a driver disc and any expansion brackets yourself. The 30-day seller warranty covers early defects only.

Helstu kostir

  • AM3+ socket supports compatible AMD processors
  • 970 chipset provides core platform features
  • ATX form factor fits standard cases
  • PCI Express x16 slot enables discrete graphics
  • I/O shield included for rear port protection

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

What mounting holes does the ATX form factor board use for case installation?

The board follows the standard ATX mounting pattern with nine screw holes that align to ATX standoffs in compatible cases.

How do I install the I/O shield that comes in the box?

Press the supplied I/O shield into the rear cut-out of the case from the inside until the clips snap, then lower the motherboard onto the standoffs.

Which on-board battery will need replacing when the firmware loses its settings?

The board uses a standard socketed coin cell that can be swapped without soldering when the clock resets after power loss.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.