Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

GIGABYTE

GIGABYTE GeForce RTX 5090 WINDFORCE OC 32G graphics card

SKU CH-GAHF-R3TPC

A GeForce RTX 5090 graphics card with 32 GB GDDR7 memory, 21760 CUDA cores, a WINDFORCE cooling system and dual BIOS modes

  • 32 GB GDDR7 memory on a 512-bit bus handles massive textures
  • WINDFORCE cooling with Hawk fans and server-grade gel keeps temperatures low
  • Dual BIOS lets you choose performance or silent operation
  • 21760 CUDA cores at 2467 MHz boost clock deliver high frame rates
  • PCIe 5.0 x16 with DisplayPort 2.1b and HDMI 2.1b supports 7680x4320 output

GPU identity and target user

The GIGABYTE GeForce RTX 5090 WINDFORCE OC 32G is a graphics card built on the NVIDIA Blackwell architecture with 32 GB of GDDR7 memory across a 512-bit bus. It targets creators and enthusiasts who need maximum frame-buffer capacity for 8K workflows or heavy compute tasks.

Sustained-load behaviour

The WINDFORCE cooling system uses Hawk fans and server-grade thermal conductive gel to move heat away from the GPU during extended sessions. A dual BIOS switch lets you choose between a 2467 MHz performance profile and a quieter silent profile without opening the case.

Compatibility checklist

Verify that your power supply delivers at least 1000 W and provides a single 16-pin connector for the card. Confirm the chassis can accommodate a 342 mm long, 150 mm wide, 65 mm thick ATX-form-factor board and that the motherboard offers a PCIe 5.0 x16 slot.

Helstu kostir

  • 32 GB GDDR7 memory on a 512-bit bus handles massive textures
  • WINDFORCE cooling with Hawk fans and server-grade gel keeps temperatures low
  • Dual BIOS lets you choose performance or silent operation
  • 21760 CUDA cores at 2467 MHz boost clock deliver high frame rates
  • PCIe 5.0 x16 with DisplayPort 2.1b and HDMI 2.1b supports 7680x4320 output

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

How loud and hot does the WINDFORCE cooling system with Hawk fan and server-grade thermal gel run under continuous load?

The WINDFORCE cooling system uses a Hawk fan and server-grade thermal conductive gel to manage heat from the 21760 CUDA cores and 32GB GDDR7 memory; a Dual BIOS switch lets you choose Performance or Silent mode for different acoustic profiles.

What power supply and connector must my system already have for this card?

A 1000W power supply is recommended and the card requires a single 16-pin power connector to deliver power to the 2467 MHz boost clock and 28 Gbps memory.

Will the 342mm length and PCIe 5.0 x16 interface fit and run in my older ATX case and motherboard?

The card measures 342mm long, 150mm wide and 65mm high on an ATX PCB; it installs in a PCIe 5.0 x16 slot and will operate at the speed of the slot generation present in your motherboard.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.