Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black slim micro-ATX tower with perforated front panel, two USB 2.0 ports on top, no fans included

GPERHUAN

GPERHUAN Micro ATX Slim Case Black No Fans

SKU CH-2E4A-DAADN

Micro ATX slim case with perforated front airflow, supports Mini-ITX and Micro ATX boards, fits up to two 120 mm and one 80 mm fans, radiators up to 135 mm.

  • TypeATX Mini Tower
  • Perforated front panel drives airflow straight to components
  • Supports Mini-ITX and Micro-ATX boards with standard ATX power supplies
  • Room for two 120 mm fans, one 80 mm fan and radiators up to 135 mm tall
  • Fits graphics cards up to 260 mm without a front fan, or 235 mm with one
  • Front I/O provides two USB 2.0 ports for easy peripheral access

Compact Micro-ATX Case for Space-Conscious Builds

The GPERHUAN Micro ATX Slim Case accepts Mini-ITX and Micro-ATX motherboards while fitting a standard ATX power supply. Its perforated front panel draws filtered air straight through the chassis to lower component temperatures. The black finish suits low-profile workstations or home-theatre PCs where desk space is limited. No fans are included so you choose the cooling mix that matches your noise target.

Upgrade Path From Cramped Enclosures

Moving from a proprietary small-form-factor box or a basic office chassis removes the tight GPU and cooler clearances that throttle performance. The jump is worth it when your current case cannot take a graphics card up to 260 mm without a front fan, or 235 mm with one fitted. Radiator height is capped at 135 mm, so custom loops taller than that will not fit. Builders who need multiple 3.5-inch drives or full-size ATX boards should look elsewhere.

Thermal Behaviour Under Continuous Load

With two 120 mm and one 80 mm fan positions available, sustained airflow scales with the fans you install rather than a single stock blower. The open front mesh feeds cool air directly to the GPU and CPU area, preventing the heat soak common in sealed slim towers during long renders or gaming sessions. Radiator support up to 135 mm lets an all-in-one liquid cooler exhaust heat without recirculation. Front USB 2.0 ports stay accessible while the system runs flat out.

Helstu kostir

  • Perforated front panel drives airflow straight to components
  • Supports Mini-ITX and Micro-ATX boards with standard ATX power supplies
  • Room for two 120 mm fans, one 80 mm fan and radiators up to 135 mm tall
  • Fits graphics cards up to 260 mm without a front fan, or 235 mm with one
  • Front I/O provides two USB 2.0 ports for easy peripheral access

Tæknilýsing

TypeATX Mini Tower

Spurningar um þessa vöru

What motherboard sizes fit the pre-drilled mounting holes?

The pre-drilled holes support Mini-ITX and Micro-ATX motherboards, and the case can also house a standard ATX power supply.

How do I install front fans without shortening the maximum graphics card length?

Adding a 120mm fan on the front panel reduces the GPU limit from 260mm to 235mm, so install the graphics card first and measure clearance before mounting the fan.

What is the tallest CPU cooler or radiator I can fit inside?

The interior accepts radiators and air coolers up to 135mm in height, so choose a low-profile cooler that stays within that limit.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.