Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 3.5 inch bare SCSI hard drive with 80-pin connector

HGST

HGST HUS151436VL3800 36.7GB 15000 RPM 16MB SCSI Ultra320 80pin 3.5" internal hard drive

SKU CH-W20V-W8ZVM MPN HUS151436VL3800

High-speed 15,000 RPM SCSI Ultra320 drive delivers 36.7 GB with 16 MB cache and 3.3 ms seek time

  • PackagingBare Drive
  • InterfaceSCSI Ultra320 80pin
  • Capacity36.7GB
  • RPM15000 RPM
  • Cache16MB
  • Average Seek Time3.3ms
  • 15000 RPM spindle speed cuts average seek time to 3.3ms
  • 16MB cache smooths burst transfers on the Ultra320 SCSI bus
  • 7GB capacity in a 3.5-inch form factor fits legacy server bays
  • Mature Ultrastar 15K147 design aids reliability and faster qualification
  • RoHS-compliant build meets restricted-substance requirements on select models

Enterprise 15K SCSI drive

The HGST Ultrastar 15K147 HUS151436VL3800 is a 36.7 GB 3.5 inch internal hard drive spinning at 15000 RPM with a 16 MB cache. It uses the SCSI Ultra320 80 pin interface and is supplied as a bare drive. The mature design targets servers and workstations that require low latency and high reliability.

Replaces slower SCSI disks

It upgrades from lower RPM SCSI drives when faster seek and latency matter for transactional workloads. The 3.3 ms average seek time and 2 ms average latency cut response times for database and email servers. The jump is worth it when the existing array is the bottleneck and the system already has a compatible Ultra320 controller.

Fits Ultra320 backplanes

The 80 pin connector slides into hot swap backplanes that accept 3.5 inch Ultra320 drives. No separate power cable is needed because power travels through the same connector. Verify that the motherboard or RAID controller supports SCSI Ultra320 before purchase; some boards are incompatible. The drive frees a PCI slot that a separate HBA would otherwise occupy.

Helstu kostir

  • 15000 RPM spindle speed cuts average seek time to 3.3ms
  • 16MB cache smooths burst transfers on the Ultra320 SCSI bus
  • 7GB capacity in a 3.5-inch form factor fits legacy server bays
  • Mature Ultrastar 15K147 design aids reliability and faster qualification
  • RoHS-compliant build meets restricted-substance requirements on select models

Tæknilýsing

BrandHitachi GST
SeriesUltrastar 15K147
ModelHUS151436VL3800 (18P6274)
PackagingBare Drive
InterfaceSCSI Ultra320 80pin
Capacity36.7GB
RPM15000 RPM
Cache16MB
Average Seek Time3.3ms
Average Latency2ms
FeaturesSome motherboards are not compatible with the SCSI interface. Please confirm which interface is appropriate for your system!
Mature design provides greater reliability and faster qualification time
RoHS compliant on select models
Form Factor3.5"
Sendingarþyngd0.77 kg
Stærð sendingar203 × 152 × 51 mm

Spurningar um þessa vöru

Does the 80-pin SCSI Ultra320 connector fit a standard 3.5-inch drive bay?

Yes, the 3.5-inch form factor matches standard bays, but the 80-pin SCA connector requires a backplane or an 80-to-68-pin adapter for cabled SCSI controllers.

What is the common installation mistake with the SCSI Ultra320 80-pin interface?

Users often forget to set the SCSI ID via the backplane jumpers or to enable termination on the last device, causing the drive to be invisible to the controller.

When should the 16 MB cache drive be replaced in a high-uptime server?

Plan replacement after five years of continuous 15,000 RPM operation or if SMART reallocated-sector counts rise, as mechanical wear accelerates at this spindle speed.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.