Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

HPE

HP P19978B21 480GB 3.5" SATA internal SSD

SKU CH-6CJM-XF86R MPN P19978B21

A 480 GB 3.5 inch SATA internal SSD built for mixed-use server workloads such as databases and virtualization, with digitally signed firmware and wear monitoring backed by 3.35 million hours

  • Device TypeInternal Solid State Drive (SSD)
  • Form Factor3.5"
  • InterfaceSATA III
  • Enterprise mixed-use performance for databases and virtualization
  • 480 GB capacity in a 3.5 inch SATA form factor
  • 35 million hours of qualification testing for reliability
  • Digitally signed firmware protects against unauthorized access
  • SmartSSD Wear Gauge monitors drive lifespan to reduce failure risk

Drive identity and purpose

This 480 GB 3.5-inch SATA III solid-state drive from HPE is built for servers and storage arrays that need a balanced mix of read and write IOPS. It targets database, virtualisation, cloud and transactional workloads where cost-effective endurance matters.

Sustained workload behaviour

The drive is classified as Mixed Use and engineered for greater endurance under continuous random read and write activity rather than short bursts. HPE backs the design with over 3.35 million hours of testing and qualification, and Digitally Signed Firmware helps ensure the firmware remains trusted throughout the drive's life.

Compatibility checklist

Verify that your server or array accepts a 3.5-inch SATA drive and that the backplane or controller supports SATA III signalling. Confirm the firmware ecosystem can recognise HPE Digitally Signed Firmware and that you can monitor wear with HPE SmartSSD Wear Gauge.

Helstu kostir

  • Enterprise mixed-use performance for databases and virtualization
  • 480 GB capacity in a 3.5 inch SATA form factor
  • 35 million hours of qualification testing for reliability
  • Digitally signed firmware protects against unauthorized access
  • SmartSSD Wear Gauge monitors drive lifespan to reduce failure risk

Tæknilýsing

BrandHPE
Device TypeInternal Solid State Drive (SSD)
Form Factor3.5"
InterfaceSATA III
Sendingarþyngd2.27 kg
Stærð sendingar274 × 218 × 147 mm

Spurningar um þessa vöru

How much power does the 3.5" SATA SSD draw during continuous operation?

The drive is designed for enterprise mixed-use workloads with power-efficient SATA III operation, and HPE qualifies it through 3.35 million hours of testing to ensure stable thermal behaviour in always-on server environments.

Which server drive bays and controllers accept this 3.5" SATA drive?

It fits standard 3.5" SATA hot-plug bays and works with any controller that supports SATA III; the digitally signed firmware guarantees compatibility with HPE Smart Array and other validated RAID controllers.

Can this 480 GB SATA SSD share a backplane with older 6 Gb SAS or SATA drives?

Yes, the SATA III interface negotiates down to 6 Gb or 3 Gb speeds automatically, so it operates alongside legacy SAS or SATA devices on the same backplane without configuration changes.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.