Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular silver blade server module with front drive bays and connector edge

HPE

HPE BL460c G10 Blade Server 2x Xeon 6130 2.1 GHz 32GB DDR4 2x 1.8TB SAS

SKU CH-X6M3-TD1KR

Blade server with dual Xeon 6130 CPUs, 32 GB DDR4 memory and twin 1.8 TB SAS drives

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.1 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size32GB
  • Dual Xeon 6130 CPUs deliver 32 cores at 2.1 GHz
  • 32 GB DDR4 ECC memory supports 128 GB maximum capacity
  • Two 1.8 TB SAS drives on Smart Array P204i-b controller
  • Integrated iLO Advanced enables full remote server management
  • Compact blade form factor fits dense 2.5-inch drive bays

HPE BL460c G10 blade server for dense compute

The HPE BL460c G10 is a half-height blade server designed for data-centre racks that need high processor density. It ships with two Intel Xeon Silver 6130 processors, each running at 2.1 GHz with 16 cores. The system includes 32 GB of DDR4 ECC registered memory and supports a maximum of 128 GB. Integrated iLO Advanced remote management allows full out-of-band control.

Dual Xeon 6130 CPUs define the performance envelope

The two installed Xeon Silver 6130 processors provide 32 total cores at 2.1 GHz, setting the ceiling for virtualisation density and threaded workloads. Memory can be expanded to 128 GB using DDR4 modules, while storage is handled by a Smart Array P204i-b SR controller driving two 1.8 TB SAS hard drives. No other CPU or memory configuration is present in this unit.

Blade installation requires a compatible enclosure

The server slides into an HPE c-Class enclosure that supplies power, cooling and interconnects. Installation is tool-less once the enclosure is racked and cabled. Common issues arise when the enclosure firmware or iLO version is older than the blade firmware, causing the blade to halt at POST. Verify enclosure compatibility before deploying.

Helstu kostir

  • Dual Xeon 6130 CPUs deliver 32 cores at 2.1 GHz
  • 32 GB DDR4 ECC memory supports 128 GB maximum capacity
  • Two 1.8 TB SAS drives on Smart Array P204i-b controller
  • Integrated iLO Advanced enables full remote server management
  • Compact blade form factor fits dense 2.5-inch drive bays

Tæknilýsing

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.1 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size32GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)3,60
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Spurningar um þessa vöru

What does the 2.1 GHz clock speed of the two Xeon 6130 CPUs mean for real-world throughput?

Each Xeon 6130 runs at 2.1 GHz with 16 cores, so the pair delivers 32 cores at that frequency for parallel workloads.

How does the Smart Array P204i-b SR controller and SAS interface limit drive performance?

The P204i-b SR Gen10 controller manages the two 1.8 TB SAS drives; SAS bandwidth and the controller's RAID logic set the practical I/O ceiling.

What physical space and mounting does a 22 x 22 x 10 in half-height blade with 2.5 in drive bays require?

The blade occupies one half-height slot in a compatible HPE c-Class enclosure and uses two 2.5 in SAS bays; rails are available on request.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.