Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 2U rack server front panel with four 3.5 inch drive bays

HPE

HPE DL380 Gen9 4LFF rack server 2x Xeon E5-2698v3 384GB DDR4

SKU CH-ZK54-YKY51

Rack server with two Xeon E5-2698v3 CPUs at 2.3 GHz, 384 GB DDR4 memory, P440 SAS controller and four 3.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.3GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon E5-2698 v3 processors deliver 32 cores at 2.3GHz
  • 384GB DDR4 ECC registered memory supports demanding virtualisation workloads
  • HPE Smart Array P440 SAS controller manages up to four 3.5in drive bays
  • HPE iLO Advanced remote management enables full out-of-band server control
  • Dual 500W Flex Slot power supplies provide redundant power for continuous uptime

HPE DL380 Gen9 4LFF dual Xeon server

This HPE ProLiant DL380 Gen9 rack server ships with two Xeon E5-2698 v3 processors running at 2.3 GHz and 384 GB of DDR4 ECC registered memory. The 4LFF chassis provides four 3.5-inch drive bays and includes an HPE Smart Array P440 SAS controller with 4 GB flash-backed write cache. Remote management is handled by HPE iLO Advanced.

Ideal for memory-heavy workloads

The dual 16-core CPUs and 384 GB RAM suit virtualisation hosts, database nodes or compute clusters that need high core counts and large memory capacity. The four-bay LFF layout fits organisations standardising on 3.5-inch SAS or SATA drives. Buyers who need more than four internal drive bays or direct-attached PCIe storage backplanes should evaluate other platforms.

Four 3.5-inch bays with P440 RAID controller

The single specification that decides fit is the 4LFF chassis combined with the P440 controller: it supports up to four 3.5-inch SAS or SATA drives in hardware RAID 0, 1, 5, 6, 10, 50 or 60. If your deployment requires more internal bays, 2.5-inch density or a different RAID engine, this server will not match the requirement.

Helstu kostir

  • Dual Xeon E5-2698 v3 processors deliver 32 cores at 2.3GHz
  • 384GB DDR4 ECC registered memory supports demanding virtualisation workloads
  • HPE Smart Array P440 SAS controller manages up to four 3.5in drive bays
  • HPE iLO Advanced remote management enables full out-of-band server control
  • Dual 500W Flex Slot power supplies provide redundant power for continuous uptime

Tæknilýsing

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.3GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)16,00
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Spurningar um þessa vöru

What drive trays or caddies are needed for the 3.5-inch bays?

The chassis accepts up to four 3.5-inch drives; matching HPE drive trays are required to mount SATA or SAS drives in the bays.

Will the P440 controller recognise older SATA drives I already own?

Yes, the P440 SAS controller supports SATA drives alongside SAS, so existing SATA disks can be used in the same array.

How can I confirm the 384 GB DDR4 memory is detected and healthy after power-on?

During POST the system memory count will display 384 GB, and the iLO interface will report all DIMMs as OK with no errors.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.