Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver rack-mount server chassis with eight 2.5-inch drive bays visible on the front

HPE

HPE ML350 Gen9 8SFF Xeon E5-2620 v3 384GB DDR4 rack server

SKU CH-BT43-5R1P4

Rack server with one 2.4 GHz Xeon E5-2620 v3 processor, 384 GB DDR4 memory, eight 2.5-inch SAS bays and HPE Smart Array P440 controller

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.4GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size384GB
  • 384GB DDR4 ECC memory powers demanding workloads
  • Single Xeon E5-2620 v3 at 2.4GHz with six cores
  • Eight 2.5-inch SAS drive bays support flexible storage
  • HPE Smart Array P440 controller manages RAID arrays
  • Dual 10GbE plus dual 1GbE network ports included

ProLiant ML350 Gen9 8SFF tower-to-rack server

The HPE ProLiant ML350 Gen9 ships in an 8SFF chassis that accepts up to eight 2.5-inch SAS drives. A single Intel Xeon E5-2620 v3 processor running at 2.4 GHz with six cores and 15 MB cache handles general-purpose workloads. 384 GB of DDR4 ECC registered memory is installed, leaving headroom to reach the 1536 GB maximum. The integrated P440 SAS controller manages the storage array.

Sustained-load behaviour with Xeon E5-2620 v3

Under continuous demand the six-core Xeon maintains its 2.4 GHz base frequency across all threads without thermal throttling. The large 384 GB DDR4 pool keeps virtual-machine fleets and in-memory databases resident, reducing swap-induced latency during extended runs. Dual 500 W Flex Slot power supplies share the load, providing redundancy if one unit fails during prolonged operation.

Thermals, noise and power draw in normal use

Redundant 500 W Flex Slot supplies draw only what the configuration requires, keeping idle consumption modest. The ML350 Gen9 chassis directs front-to-rear airflow through tuned fan curves, so acoustic output stays at office-friendly levels during typical business hours. HPE iLO Advanced remote management lets administrators monitor temperatures and power metrics without physical access to the rack.

Helstu kostir

  • 384GB DDR4 ECC memory powers demanding workloads
  • Single Xeon E5-2620 v3 at 2.4GHz with six cores
  • Eight 2.5-inch SAS drive bays support flexible storage
  • HPE Smart Array P440 controller manages RAID arrays
  • Dual 10GbE plus dual 1GbE network ports included

Tæknilýsing

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.4GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity1536GB
Hard Drive (Installed)3,60
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Spurningar um þessa vöru

How much power do the dual 500W supplies draw under full load?

Each supply is rated at 500W; the server includes two units for redundancy.

Which drive caddies and SAS cables are required to populate the 8SFF bays?

The 2.5" bays accept standard SFF caddies; the P440 controller uses SAS cables that ship with the chassis.

Will the iLO Advanced remote management work with my existing Gen8 rack monitoring?

iLO Advanced runs independently; it can be accessed alongside older iLO versions from the same network.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.