HUADISK
HUADISK HYV128X3(4280) 128GB 2242 NVMe internal SSD
- Up to 2000 MBps
- Up to 1100 MBps
37,99 USD
0.00048801BTC
Til á lager
HUADISK
HUADISK HYV256X3(4280) 256GB internal SSD
A 256 GB internal SSD with a 2242 module and 2280 extension board for dual-slot compatibility, delivering up to 1700 MBps read and 1300 MBps write speeds
- Max Sequential ReadUp to 1700 MBps
- Max Sequential WriteUp to 1300 MBps
- 4KB Random ReadUp to 200,000 IOPS
- 4KB Random WriteUp to 230,000 IOPS
- Terabytes Written (TBW)200TB
- MTBF1,000,000 hours
Capacity 256GB
- 128GB
- 256GB
- Fast boots and loads from 1700 MBps sequential read
- Smooth multitasking backed by 200000 IOPS random read
- Fits tight laptop slots with 2242 module plus 2280 extension board
- Runs cool under heavy work using graphene cooling layer
- Long service life rated at 1000000 hours MTBF
What This Drive Is
The HUADISK HYV256X3(4280) is a 256GB internal SSD that ships as a 2242 module with a 2280 extension board. It uses 3D NAND flash and the NVMe 1.3 protocol over a PCI-Express 3.0 x4 interface to deliver sequential reads up to 1700 MBps and writes up to 1300 MBps.
Who It Suits
This drive suits owners of laptops or single-board computers that only have a 2242 M.2 slot but want the option to fit a standard 2280 bay later. It is not suited for systems that require a heatsink-equipped drive or for workloads that need sustained throughput beyond the rated 1300 MBps write ceiling.
The Spec That Decides Fit
The physical length is the deciding factor because the base module measures 2242 while the included extension board brings it to 2280, so you must verify which M.2 key and length your motherboard or laptop actually accepts before buying.
Helstu kostir
- Fast boots and loads from 1700 MBps sequential read
- Smooth multitasking backed by 200000 IOPS random read
- Fits tight laptop slots with 2242 module plus 2280 extension board
- Runs cool under heavy work using graphene cooling layer
- Long service life rated at 1000000 hours MTBF
Tæknilýsing
| Max Sequential Read | Up to 1700 MBps |
|---|---|
| Max Sequential Write | Up to 1300 MBps |
| 4KB Random Read | Up to 200,000 IOPS |
| 4KB Random Write | Up to 230,000 IOPS |
| Terabytes Written (TBW) | 200TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Form Factor | M.2 2280 |
| Capacity | 256GB |
| Interface | PCI-Express 3.0 x4 |
| Memory Components | 3D NAND |
| Protocol | NVMe 1.3 |
| Power Consumption (Active) | 3.23W |
| Power Consumption (Idle) | 1.19W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Brand | HUADISK |
| Series | HYVXXXX3(4280) |
| Model | HYV256X3(4280) |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Height | 22mm |
| Width | 80mm |
| Depth | 2.1mm |
| Weight | 100g |
Aðrar útgáfur af þessari vöru
1 í viðbót í sama vöruflokki
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
Spurningar um þessa vöru
Does the drive fit a standard M.2 2280 slot without the extension board?
The supplied board converts the native 2242 module to the full 2280 length, so the assembly occupies a 2280 slot as a single unit.
Will it work in a laptop that only supports PCIe 3.0 x4 NVMe?
Yes, the drive uses the PCIe 3.0 x4 interface and NVMe 1.3 protocol, matching that requirement exactly.
Is a separate heatsink needed for sustained heavy workloads?
The module uses graphene cooling material instead of a traditional heatsink and is rated for 0 °C to 70 °C operation.
Einnig í þessum vöruflokki
Fólk bar þetta saman
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
