Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Gray aluminum M.2 NVMe enclosure with USB-C cable

iDsonix

iDsonix SANZANG Aluminum M.2 NVMe Enclosure 10 Gbps Gray

SKU CH-K928-3CV2E

Aluminum M.2 NVMe enclosure delivers 10 Gbps USB 3.1 Gen 2 speeds and improves heat dissipation by 30 percent with an integrated heatsink design

  • ColorGray
  • SizeM.2
  • TypeEnclosure
  • MaterialAluminum / Plastic
  • Internal InterfaceM.2 NVME M-Key
  • External InterfaceUSB Type C
  • 10 Gbps theoretical bandwidth via USB 3.1 Gen 2 Type-C with UASP support
  • Aluminium shell and thermal pad improve cooling efficiency by 30 %
  • Overheating protection switches to read-only or throttles speed to protect data
  • Tool-free installation accepts M-key NVMe SSDs up to 4 TB
  • Backwards compatible with USB 3.0 and 3.1 Gen 1 ports at 500 MB/s

Enclosure for M.2 NVMe SSDs

This aluminum enclosure accepts a single M.2 NVMe drive and connects it to a host through a USB Type C port. It supports drives up to 4 TB and is intended for home or office users who need portable, high-speed external storage.

USB 3.1 Gen 2 10 Gbps interface limits

The enclosure uses a USB 3.1 Gen 2 Type C connection with a theoretical ceiling of 10 Gbps and supports the UASP acceleration protocol. On a USB 3.0, USB 3.1 Gen 1 or USB 3.2 Gen 1 port the practical throughput is limited to 500 MB/s. To reach 900 MB/s or more the host must provide a USB 3.1 Gen 2 or USB 3.2 Gen 2 connection.

Overheating protection behavior

When the SSD temperature rises during large transfers the enclosure activates thermal protection and either switches to read-only mode, reduces the transfer rate or pauses the transfer entirely. This safeguard prevents data loss but means sustained write workloads can be interrupted if cooling is insufficient.

Helstu kostir

  • 10 Gbps theoretical bandwidth via USB 3.1 Gen 2 Type-C with UASP support
  • Aluminium shell and thermal pad improve cooling efficiency by 30 %
  • Overheating protection switches to read-only or throttles speed to protect data
  • Tool-free installation accepts M-key NVMe SSDs up to 4 TB
  • Backwards compatible with USB 3.0 and 3.1 Gen 1 ports at 500 MB/s

Tæknilýsing

BrandSANZANG
ModelM.2 SSD Enclosure
ColorGray
SizeM.2
TypeEnclosure
MaterialAluminum / Plastic
Internal InterfaceM.2 NVME M-Key
External InterfaceUSB Type C
HDD Count SupportedSingle NVMe SSD
Maximum Capacity (per Bay)Up to 4TB

Spurningar um þessa vöru

Which capacity should I choose for this enclosure?

The enclosure accepts a single M.2 NVMe drive up to 4TB. Pick the capacity that matches your storage needs; the hardware limit is 4TB per bay.

What does the 10 Gbps figure mean once the enclosure is in a real machine?

With a USB 3.1 Gen 2 or USB 3.2 Gen 2 host port you can reach 900+ MB/s. On a USB 3.0 / USB 3.1 Gen 1 / USB 3.2 Gen 1 port the speed caps at 500 MB/s.

What interface standard does the enclosure use and what does it cap in practice?

It uses a USB Type-C connection running USB 3.1 Gen 2 at 10 Gbps. The practical ceiling is 900+ MB/s on Gen 2 hosts and 500 MB/s on Gen 1 hosts.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.