Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular metal ATX power supply unit in black finish

In Win

In Win IW-P300A2-0 300 W ATX power supply

SKU CH-AXYV-XBH5Z MPN IW-P300A2-0

An ATX power supply delivering 300 W across 3.3 V, 5 V, 12 V, -12 V and 5 VSB rails for standard desktop builds

  • TypeATX
  • Maximum Power300 W
  • Input Voltage115 / 230 V
  • Input Frequency Range50/60 Hz
  • Input Current8A @ 115V, 4A @ 230V
  • Output+3.3V@28A,+5V@30A,+12V@15A, [email protected] , [email prote
  • Delivers 300 W maximum power for stable system operation
  • Dual 115 V and 230 V input supports worldwide mains voltages
  • Operates at 50 Hz or 60 Hz for broad grid compatibility
  • Strong +3.3 V and +5 V rails provide 28 A and 30 A for legacy components
  • Dedicated +5 VSB rail supplies 2 A for standby functions

ATX 300 W power supply

The In Win IW-P300A2-0 is a standard ATX power supply rated for 300 W maximum output. It suits basic desktop builds or replacement of an existing unit in a compatible chassis.

Continuous 300 W delivery with dual-voltage input

The unit accepts 115 V or 230 V input at 50 Hz or 60 Hz, drawing 8 A at 115 V and 4 A at 230 V. Its +12 V rail supplies 15 A while the +3.3 V and +5 V rails deliver 28 A and 30 A respectively, providing stable power across all rails during sustained loads.

Verify ATX fit and connector needs before ordering

Ensure your case accepts a standard ATX form-factor supply and that your motherboard and drives match the available output connectors. The +5 VSB rail provides 2 A for standby functions, and the combined minor rails support typical legacy and current peripheral demands.

Helstu kostir

  • Delivers 300 W maximum power for stable system operation
  • Dual 115 V and 230 V input supports worldwide mains voltages
  • Operates at 50 Hz or 60 Hz for broad grid compatibility
  • Strong +3.3 V and +5 V rails provide 28 A and 30 A for legacy components
  • Dedicated +5 VSB rail supplies 2 A for standby functions

Tæknilýsing

BrandIN WIN
ModelIW-P300A2-0
TypeATX
Maximum Power300 W
Input Voltage115 / 230 V
Input Frequency Range50/60 Hz
Input Current8A @ 115V, 4A @ 230V
Output+3.3V@28A,+5V@30A,+12V@15A, [email protected] , [email protected] ,+5VSB@2A
Sendingarþyngd2.27 kg
Stærð sendingar140 × 127 × 102 mm

Spurningar um þessa vöru

How much heat and fan noise should I expect from the 300 W unit when it runs continuously?

The supply draws 8 A at 115 V or 4 A at 230 V and delivers up to 300 W, so sustained load will produce typical ATX heat and fan noise for a 300 W design.

Which motherboard and drive connectors must my case already provide for this ATX power supply to work?

The unit follows the ATX form factor and provides +3.3 V at 28 A, +5 V at 30 A, +12 V at 15 A and +5 VSB at 2 A through standard ATX output leads.

Will the +12 V rail at 15 A support older AGP graphics cards and IDE drives I want to keep?

The +12 V rail supplies 15 A and the +5 V rail supplies 30 A, matching the power needs of many legacy AGP cards and IDE devices.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.