Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 2U rackmount server chassis with two front 5.25-inch drive bays and front USB ports

In Win

In Win IW-R200-02N Silver 2U Rackmount Server Chassis

SKU CH-C277-D4YM0 MPN IW-R200-02N

A 2U rackmount chassis holding two 5.25" and four 3.5" drives with dual 80mm PWM fans and EPYC compliance

  • Chassis TypeRackmount
  • Form Factor2U
  • ColorSilver
  • Case MaterialSGCC
  • Motherboard CompatibilityATX
  • External 5.25" Drive Bays2
  • ATX motherboard support fits standard server builds
  • Two external 5.25" bays allow optical or hot-swap accessories
  • Four internal 3.5" bays provide high-density storage capacity
  • Dual 80 mm PWM fans deliver front-to-rear airflow
  • EPYC family compliance ensures processor compatibility
  • Seven low-profile or three full-height slots via riser expand I/O options

2U Rackmount Chassis for ATX Boards

The In Win IW-R200-02N is a silver 2U server chassis built from SGCC steel. It accepts standard ATX motherboards and provides two external 5.25 inch drive bays plus four internal 3.5 inch bays. Two 80 by 25 millimetre PWM fans, one front and one rear, are included for airflow. The unit measures 3.46 by 17.02 by 19.84 inches and weighs 15.83 pounds.

Suits Dense Rack Builds.

This chassis suits integrators building short-depth rackmount systems that need front-accessible optical or hot-swap bays. It also fits EPYC family platforms running in 2U spaces. Builders who require more than seven low-profile expansion slots or who must run full-height cards without installing the optional riser card and rear holder should look at something else.

Verify Rack Depth and Power Supply Form Factor

Before ordering, confirm your rack cabinet can accommodate the 17.02 inch chassis depth with cable clearance. Check that your chosen power supply matches the supported single 500 watt, redundant 500 watt or CRPS 550 watt and 800 watt form factors. Ensure the motherboard mounting holes align with ATX specifications and that low-profile brackets are available for any add-in cards.

Helstu kostir

  • ATX motherboard support fits standard server builds
  • Two external 5.25" bays allow optical or hot-swap accessories
  • Four internal 3.5" bays provide high-density storage capacity
  • Dual 80 mm PWM fans deliver front-to-rear airflow
  • EPYC family compliance ensures processor compatibility
  • Seven low-profile or three full-height slots via riser expand I/O options

Tæknilýsing

BrandIN WIN
ModelIW-R200-02N
Chassis TypeRackmount
Form Factor2U
ColorSilver
Case MaterialSGCC
Motherboard CompatibilityATX
External 5.25" Drive Bays2
Internal 3.5" Drive Bays4
Expansion SlotsLow profile PCI slot x 7 or full-height PCI slot x 3 (via riser card)
Front Ports2 x USB 2.0
80mm Fans80 x 25mm PWM front fan x 1
80 x 25mm PWM rear fan x 1
FeaturesCompliance for AMD EPYC family
2U rackmount supports ATX motherboard
Supporting external 5.25" x 2 and internal 3.5" HDD x 4
Supports 80 x 25mm cooling fans x 2
Compatible with single PSU 500W, redundant 500W or CRPS 550W/800W
Expandable storage option with InWin storage kit
Supporting 7 low-profile cards or optional full-height PCI slots x 3 with rear PCI card holder
Dimensions3.46" x 17.02" x 19.84"
Weight15.83 lbs.
Sendingarþyngd10.12 kg
Stærð sendingar680 × 560 × 200 mm

Spurningar um þessa vöru

Which ATX motherboard and PSU do I need to install so the IW-R200-02N will power on?

Install any standard ATX motherboard and choose a single 500W PSU, a redundant 500W PSU or a CRPS 550W/800W unit — the chassis is built for those exact power supplies.

Will my existing low-profile PCI cards fit the seven slots, or do I need a riser for full-height cards?

The chassis accepts seven low-profile cards directly; for full-height cards you must use the optional riser card, which reduces the count to three slots.

How can I confirm the front and rear 80mm PWM fans are spinning correctly after assembly?

Connect each fan to a PWM header, power the system and verify both the front and rear 80 x 25mm fans spin up and respond to speed changes in the BIOS or monitoring software.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.