Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Red 4U rackmount server chassis with twelve front hot-swap 3.5-inch drive bays

iStarUSA Inc.

iStarUSA Inc. D410-DE12RD 4U 12-Bay Server Chassis

SKU CH-2NJE-JK359 MPN D410-DE12RD

A 4U rackmount chassis holding twelve hot-swap 3.5" drives with dual 120mm fans and USB 2.0 front ports

  • Chassis TypeRackmount
  • Form Factor4U
  • ColorRed
  • Case MaterialZinc-Coated Steel
  • Motherboard CompatibilityATX / E-ATX / Micro ATX
  • LED IndicatorsPower, HDD
  • 12 hot-swap 3.5" bays for high-density storage
  • 4U rackmount form fits standard server racks
  • Supports ATX, E-ATX and Micro ATX motherboards
  • Dual 120mm fans provide front-to-rear airflow
  • Zinc-coated steel chassis with red finish

4U Rackmount Storage Platform

The iStarUSA D410-DE12RD is a 4U rackmount server chassis finished in red zinc-coated steel. It accepts ATX, E-ATX and Micro ATX motherboards and provides twelve hot-swap 3.5-inch drive bays. Two 120mm fans supply airflow across the drive array. The unit measures 7.00 by 25.00 by 19.00 inches.

Upgrade from Fixed-Bay Towers

This chassis replaces tower cases that rely on internal drive cages and fixed mounting. The hot-swap trayless design lets administrators insert or remove drives without tools or system shutdown. The jump is worthwhile when uptime and quick drive replacement outweigh the larger rack footprint and the need for a rack cabinet.

Limits of the Front USB 2.0 Interface

The front panel offers a single USB 2.0 port for local media or diagnostic tools. Bandwidth is limited to the 2.0 specification, so large dataset transfers or modern peripheral speeds are not supported at the front. Builders who need faster external connectivity must route cables to rear motherboard ports or add expansion cards.

Helstu kostir

  • 12 hot-swap 3.5" bays for high-density storage
  • 4U rackmount form fits standard server racks
  • Supports ATX, E-ATX and Micro ATX motherboards
  • Dual 120mm fans provide front-to-rear airflow
  • Zinc-coated steel chassis with red finish

Tæknilýsing

BrandiStarUSA
ModelD410-DE12RD
Chassis TypeRackmount
Form Factor4U
ColorRed
Case MaterialZinc-Coated Steel
Motherboard CompatibilityATX / E-ATX / Micro ATX
LED IndicatorsPower, HDD
Hot-Swap Drive Bays12 x Hotswap 3.5"
Expansion Slots7
Front PortsUSB 2.0
120mm Fans2
Dimensions7.00" x 25.00" x 19.00"
Sendingarþyngd18.14 kg
Stærð sendingar724 × 584 × 311 mm

Spurningar um þessa vöru

What rack depth and clearance does the 25.00-inch deep 4U chassis require?

The chassis is 25.00 inches deep, so the rack must provide at least that much usable depth plus cable space behind the rear panel; allow extra room for the two 120 mm fans exhausting out the back.

How do the 12 trayless 3.5-inch hot-swap bays load, and what is the common mistake?

Drives slide straight into the front bays until the connector seats; the common mistake is stopping short of the firm click that locks the drive to the backplane.

What ongoing maintenance do the two 120 mm fans and front USB 2.0 port need?

Vacuum dust from the fan frames and intake vents every few months; if a fan becomes noisy or stops spinning, replace it with another 120 mm unit, and keep the USB port free of debris.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.